EN User manual Fridge Freezer ZRB934EW
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 2 4 5 5 6 7 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Env
• It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. Warning! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid hazard. 1. 2. • • • • Power cord must not be lengthened. Make sure that the power plug is not squashed or damaged by the back of the appliance.
• The appliance must not be located close to radiators or cookers. • Make sure that the mains plug is accessible after the installation of the appliance. • Connect to potable water supply only (If a water connection is foreseen). Service • Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person. • This product must be serviced by an authorized Service Centre, and only genuine spare parts must be used.
9 Door shelf 10 Bottle shelf 13 Frostfree basket 14 Cold module 11 Freezer basket 12 Maxibox basket 15 Rating plate Control panel 1 2 5 1 Temperature indicator LED 2 Fast Freeze indicator 3 Door sensor 4 Fast Freeze button 5 Temperature regulator Switching on Insert the plug into the wall socket. Temperature regulation To operate the appliance, proceed as follows: • touch the temperature regulator button until the LED corresponding to the required temperature lights up.
Important! Do not use detergents or abrasive powders, as these will damage the finish. Daily use Freezing fresh food The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. To freeze fresh food activate the Action Freeze function at least 24 hours before placing the food to be frozen in the freezer compartment. Place the fresh food to be frozen in the upper drawer, as this is the coldest point.
Removal of freezing baskets from the freezer The freezing baskets have a limit stop to prevent their accidental removal or falling out. At the time of its removal from the freezer, pull the basket towards yourself and, upon reaching the end point, remove the basket by tilting its front upwards. At the time of putting it back, slightly lift the front of the basket to insert it into the freezer. Once you are over the end points, push the baskets back in their position.
• water ices, if consumed immediately after removal from the freezer compartment, can possibly cause the skin to be freeze burnt; • it is advisable to show the freezing in date on each individual pack to enable you to keep tab of the storage time.
tion, neither on the internal walls nor on the foods. The absence of frost is due to the continuous circulation of cold air inside the compartment, driven by an automatically controlled fan. Periods of non-operation When the appliance is not in use for long periods, take the following precautions: • disconnect the appliance from electricity supply • remove all food • defrost (if foreseen) and clean the appliance and all accessories • leave the door/doors ajar to prevent unpleasant smells.
Problem Possible cause Solution Water flows on the ground. The melting water outlet does not flow in the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray. The temperature in the appliance is too low/high. The temperature regulator is not set correctly. Set a higher/lower temperature. If your appliance is still not working properly after making the above checks, contact the After Sales Centre. You can find the list at the end of this manual.
best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the appliance should not be positioned below overhanging wall units. Accurate levelling is ensured by one or more adjustable feet at the base of the cabinet. 2 Warning! It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.
A 2. B C D E Important! The wires in the mains lead are coloured in accordance with the following code: A Green and Yellow: Earth C Brown: Live D Blue: Neutral E B F C D 12 B Warning! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely. Door reversibility As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1.
• Open the doors. Unscrew the middle hinge (B). Remove the plastic spacer (A). • Remove the spacer (F) and move to the other side of the hinge pivot (E). • Remove the doors. • Remove the lefthand cover pin of the middle hinge (C,D) and move to the other side. • Fit the pin of the middle hinge (C) into the left-hand hole of the lower door. • Unscrew the lower • Remove the plugs hinge (A) (1)on the upper side of both doors • Remove the leftand move them to hand cover pins (D) the other side.
www.zanussi.
www.zanussi.
280150738-A-192012 www.zanussi.
