User Guide

This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated
WEE/CG0783SS collection point as defined by your local council.
© 2022 System Q Ltd
2
Slim & Compact Exit Buttons
Zap is a registered trademark of System Q Ltd
Document ref: qACC200-253
All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is
made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise,
from errors or omissions in these instructions, or the performance or non-performance of the equipment refered to.
Connections - ACC200
For operation with a door access control panel and lock, the exit
button is provided with NO/COM terminals.
Connections - ACC202, ACC250-252
For operation with a door access control panel and lock, the exit
button button is provided with NC or NO and COM connection wires.
Connections - ACC253
For operation with a door access control panel and lock, the exit
button is provided with NC or NO.
The ACC063 also has a built in blue LED which requires 12V DC (not
supplied with the product).
Troubleshooting
If the exit button is not activating the lock then there is likely a shorted wire, open circuit or some
other failed device in the circuit.
To identify where the fault is, each wired connection in the circuit needs to be tested; working from
the push button progress through, including the keypad, the access controller, power supply and the
magnetic lock.
If the fault is with the access control button then check the connection wires for continuity and for
trapped wires. Check for water ingress on the wired connections. Check the polarity in the power
connections and ensure the connections are connected to the proper terminals.
Specification
ACC200
ACC202
ACC250-252
ACC253
Construction
Zinc Alloy
Zinc Alloy
Zinc Alloy
Zinc Alloy
Terminals
NO/Common (Screw
Terminals)
NO/NC/Common
(Wires)
NO/NC/Common
(Wires)
NO/Common/ +12V
DC/ GND (Wires)
Rating
2A12V DC Max
2A12V DC Max
0.5-1A 12V DC Max
0.5-1A 12V DC Max
LED Colour
~
~
~
Blue LED
Dimensions
80 x 30 x 26mm
93 x 35 x 28mm
53 x 53 x28mm
53 x 53 x28mm