User manual

AE9ZP0BD - DUALAC2/&HP/POWER - User Manual Page - 61/89
3) PU. ACCELER. DELAY
Acceleration ramp of pump motor.
4) PU. DECELER. DELAY
Deceleration ramp of pump motor.
5) CREEP SPEED
It determines the minimum lifting speed (per cent of voltage applied to the
motor) with a potentiometer control, when the potentiometer is at the
minimum of the programmed range.
6) COMPENSATION
This parameter sets the voltage compensation (DV) applied to the motor
when the proportional lifting function is active. The value of this DV applied to
the motor is a function of the motor current. Aim of this function is to reduce,
as for as possible, the speed change when the motor is loaded. Increasing
the parameter, the DV will be increased.
7) 1ST SPEED FINE
This parameter sets the pump motor speed (voltage applied to the motor)
when the 1st speed request is active.
8) 1ST SPEED COMP.
This parameter sets the voltage compensation (DV) applied to the motor
when the 1st speed request is active. The value of DV applied to the motor is
a function of the motor current. Aim of this function is to reduce, as for as
possible, the speed change when the motor is loaded. Increasing the
parameter, the DV is increased.
9) 2ND SPEED FINE
This parameter sets the voltage compensation (DV) applied to the motor
when the 2nd speed request is active. The value of DV applied to the motor
is a function of the motor current. Aim of this function is to reduce, as for as
possible, the speed change when the motor is loaded. Increasing the
parameter, the DV is increased.
10) 2ND SPEED COMP.
This parameter sets the voltage compensation (DV) applied to the motor
when the 2nd speed request is active. The value of DV applied to the motor
is a function of the motor current. Aim of this function is to reduce, as for as
possible, the speed change when the motor is loaded. Increasing the
parameter, the DV is increased.
11) 3RD SPEED FINE
This parameter sets the voltage compensation (DV) applied to the motor
when the 3rd speed request is active. The value of DV applied to the motor is
a function of the motor current. Aim of this function is to reduce, as for as
possible, the speed change when the motor is loaded. Increasing the
parameter, the DV is increased.
12) 3RD SPEED COMP.
This parameter sets the voltage compensation (DV) applied to the motor
when the 3rd speed request is active. The value of DV applied to the motor is
a function of the motor current. Aim of this function is to reduce, as for as
possible, the speed change when the motor is loaded. Increasing the
parameter, the DV is increased.
13) 4TH SPEED FINE
This parameter sets the voltage compensation (DV) applied to the motor
when the 4th speed request is active. The value of DV applied to the motor is
a function of the motor current. Aim of this function is to reduce, as for as
possible, the speed change when the motor is loaded. Increasing the
parameter, the DV is increased.
14) 4TH SPEED COMP.
This parameter sets the voltage compensation (DV) applied to the motor