User manual

ManualsBrandsZapi ManualsConsumer electronicsAC-2

AE9ZP0BD - DUALAC2/&HP/POWER - User Manual Page - 65/89

8.6 Programming console functions

8.6.1 "Dualac2" and "Dualac2 Power"

- Functional configuration (see 8.4)

- Parameter programming (see 8.5)

- Tester: user can verify the state of the following parameters:

MASTER SLAVE

motor voltage (%) motor voltage (%)

frequency (Hz) frequency (Hz)

encoder (Hz) encoder (Hz)

slip value (Hz) slip value (Hz)

current rms (A) current rms (A)

temperature (°C) temperature (°C)

temperature #1(°C) voltage booster (%)

temperature #2(°C) battery voltage (V)

accelerator (V) seat switch (ON/OFF)

steer angle (°) forward switch (ON/OFF)

int. wheel cutback (%) backward switch (ON/OFF)

forward switch (ON/OFF) enable switch (ON/OFF)

backward switch (ON/OFF)

enable switch (ON/OFF)

seat switch (ON/OFF)

backing switch (ON/OFF)

cutback switch (ON/OFF)

brake switch (ON/OFF)

exclusive hydro (ON/OFF)

brakepedal pot. (%)

handbrake (ON/OFF)

voltage booster (%)

battery voltage (V)

battery charge (%)

hours-meter

- Save function (for storing data) --> only with Pc-console.

- Restore function (for downloading parameters to another controller) --> only

with Pc-console.

- Display of the last 5 alarms including hour-meter value and temperature at

the moment of the alarm.

- Accelerator range programming.

Records the minimum and maximum useful accelerator stroke values for

both direction of running.

- See the console manual for a detailed description of function and

parameters.

8.6.2 "Dualac2&hp" and "Dualac2&hp Power"