Specifications

2=CA!!
Flow chart showing how to make changes to OPTION Menu.
1) Opening Zapi Menu
2) Press Top Left & Right Buttons to enter
SET Menu.
3) The Display will show: SET MODEL
4) Press ROLL UP or ROLL DOWN button
until SET MODEL Menu appears.
5) SET OPTIONS appears on the display.
6) Press ENTER to go into the
SET MODEL Menu.
7) The display will shows the first OPTION.
8) Press ROLL UP or ROLL DOWN button
until desired OPTION appears
9) Desired OPTION appears.
10) Press SET UP or SET DOWN button in
order to modify the changes.
11) New OPTION appears.
12) Press OUT to exit the Menu.
13) Confirmation request appears.
14) Press ENTER to accept the changes,
or press OUT if you do not accept
the changes.
15) SET OPTIONS Menu appears.
16) Press OUT again. Display now show the
Opening Zapi Menu.