Specifications

2=CA!%
4.5 PARAMETER REGULATION: STANDARD VERSION
The following parameters can be modified:
1 ACC DELAY: determines the acceleration ramp.
2 RELEASE BRAKING: controls the deceleration ramp when the travel
request is released.
3 INVERSION BRAKING: controls the deceleration ramp when the direction
switch is inverted during travel..
4 PEDAL BRAKING: determines the deceleration ramp when the travel
request is released and the brake pedal switch is
closed.
5 SPEED LIMIT BRAKING: deceleration ramp when the pedal position is
changed but not completely released.
6 BRAKE CUTBACK: determines the deceleration ramp when the speed
reduction input becomes active and the motor slow
down.
7 MAX SPEED FORWARD: determines the maximum speed in forward direction.
8 MAX SPEED BACKWARD: determines the maximum speed in backward
direction.
9 CUTBACK SPEED 1: speed reduction when the cutback switch 1 is active.
10 CUTBACK SPEED 2: speed reduction when the cutback switch 2 is active.
11 CUTBACK SPEED 3: speed reduction when the cutback switch 3 is active.
12 H&S CUTBACK: speed reduction when the Hard&Soft switch is active.
13 FREQUENCY CREEP: minimum speed when the forward or reverse switch
is closed, but the accelerator is on a minimum
position.
14 MAXIMUM CURRENT: this changes the maximum current of the inverter.
15 BACKING SPEED: determines the speed in inching function.
16 BACKING TIME: determines the time of the inching function.
17 AUXILIARY TIME: determines the time that the truck is hold on the ramp
if the "stop on ramp" option is ON.