Specifications
EM 220
Rev. 1.00
- 13 -
Mobile Printer Command Manual
[Notes]
This is a status request command to determine if the printer is off-line or if
an error condition has occurred. Take the following into consideration:
• If this command interrupts the code string of another command, this
command is processed as a parameter of the other command; therefore,
the print result will not be correct.
• If a command such as graphics data or defined data has a code string
that is the same as a code string in a parameter, the printer processes and
then continues with the bit-image or other command.
• This command following DLE can be executed in real-time command
mode.
This command is ignored when transmitting block data (Header ~ NUL).
ESC FF
[Name]
[Format]
[Description]
Print data in page mode.
ASCII ESC FF
Hex 1B 0C
Decimal 27 12
▪ In page mode, prints all buffered data in the print area.
▪ After printing, the printer does not clear the buffer data.
▪ This command is used when the page mode data is printed repeatedly.
ESC SP n
[Name]
[Format]
[Range]
[Default]
[Description]
Set right-side character spacing.
ASCII ESC SP n
Hex 1B 20 n
Decimal 27 32 n
0 ≤ n ≤ 255
n=0
▪ Sets the character spacing for the right side of the character to
[n ×horizontal or vertical motion units].
▪ The maximum right-side character spacing is:
- 31.875mm.