Specifications

EM 220
Rev. 1.00
- 29 -
Mobile Printer Command Manual
<Function 3> BS ^ E pL pH fn [b18...b11]...[ bk8...bk1] (fn=3)
[Format]
[Range]
[Default]
[Description]
ASCII BS ^ E pL pH fn [b18...b11]... [bk8...bk1]
Hex 08 5E 45 pL pH fn [b18...b11]... [bk8...bk1]
Decimal 08 94 69 pL pH fn [b18...b11]... [bk8...bk1]
9≤ (pL + pH x 256) ≤ 65535
fn=3
b=48, 49, 50
▪ All switches are set to Off (b=48).
▪Changes all the Memory Switch 1~8 to the value specified by b at a time.
- When b=48, the applicable bit is turned to Off.
- When b=49, the applicable bit is turned to On.
- When b=50, the applicable bit is not changed.
▪ b1 value is set the memory switch 1 as follows:
Set Value
Msw
3 2 1
Function
48 48 48 print density 130%
48 48 49 print density 120%
48 49 48 print density 110%
48 49 49 print density 150%
49 48 48 print density 100%
49 48 49 print density 140%
49 49 48 print density 90%
1-1~3
49 49 49 print density 80%
48 2 byte character mode not selected
1-4
49 2 byte character mode selected
48 print speed 80mm/s
1-5
49 print speed 50mm/s
1-6 48 not used
▪ b2 value is set the memory switch 2 as follows:
Msw
Set Value Function
2-1 48 not used
2-2 48 not used
2-3 48 not used