Specifications

EM 220
Rev. 1.00
- 31 -
Mobile Printer Command Manual
▪ b3 value is set the memory switch 3 as follows:
Msw Set Value Function
48 PDF417 not selected
3-1
49 PDF417 selected
48 DATAMATRIX not selected
3-2
49 DATAMATRIX selected
48 MAXI CODE not selected
3-3
49 MAXI CODE selected
48 QR CODE not selected
3-4
49 QR CODE selected
▪ b4 value is set the memory switch 5 as follows:
Specify the length of idle time before the printer enters the power-down mode.
When memory switch value is 0, the power-down mode is not active.
MSW5-8 MSW5-7 MSW5-6 MSW5-5 MSW5-4 MSW5-3 MSW5-2 MSW5-1 Value
48 48 48 48 48 48 48 48 0
48 48 48 48 48 48 48 49 1
48 48 48 48 48 48 49 48 2
48 48 48 48 48 48 49 49 3
48 48 48 48 48 49 48 48 4
. . . . . . . .
. . . . . . . .
. . . . . . . .
48 49 48 49 49 48 49 48 90
▪ b5 value is set the memory switch 6 as follows
:
Minimum = 10 seconds
Maximum = 255 seconds
Set the standby time before the printer enters the power saving mode.
When memory switch value is 0, the power saving mode does not work.
MSW6-8 MSW6-7 MSW6-6 MSW6-5 MSW6-4 MSW6-3 MSW6-2 MSW6-1 Value
48 48 48 48 49 48 49 48 10
48 48 48 48 49 48 49 49 11
48 48 48 48 49 49 48 48 12
48 48 48 48 49 49 48 49 13
48 48 48 48 49 49 49 48 14
. . . . . . . .
. . . . . . . .
. . . . . . . .
49 49 49 49 49 49 49 49 255