Specifications

EM 220
Rev. 1.00
- 40 -
Mobile Printer Command Manual
[Notes] For PDF417 symbol data (when cn=48)
▪ The symbol data specified by Function 080 d1...dk is stored in the printer
and is printed by the specification of Function 081. The symbol data in the
save area is reserved until the following processing is performed:
- Function 080 is executed
- ESC @ is executed
- The printer is reset or the power is turned off
▪ When processing Function 081 or 082, the setting values of Functions
065 to 070 are used. If the printable area is not large enough, the symbol
may not be printed.
▪ Executing Function 081 after executing Function 080 repeatedly prints the
same symbol data.
▪ By using Functions 065 to 070 combined with Function 081, the same
symbol data d1...dk is printed differently.
▪ By using Function 082, the symbol size printed by Function 081 is
available.
QRCODE Symbol Data (cn = 49)
▪ Symbol data is saved according to <Function 180> and printed according
to <Function 181>. The symbol data in the storage area is saved until the
following actions:
- Execution of Function 180
- Execution of ESC @
- Turn off printer power
▪ When either Function 181 or Function 182 is executed, the setting values
of Functions 165~169 are used. If the printable area is insufficient in size,
the symbol data is not printed.
▪ According to the settings of <Function 165> to <Function 169>, <Function
181> has and prints the same data d1….dk.
▪ <Function 182> uses the size printed by <Function 181>.