User guide

English
34
BASIC
CONFIGURATION
To enable/disable Cloning Mode:
1. Press PTT and SB2 buttons while turning the
radio ON.
The RDM2080d emits a distinctive sound and
shows the word CLONE on the display.
The RDM2020 emits a distinctive sound and
the LED indicates two orange heartbeats
2. Turn the radio OFF and back ON to disable
Cloning mode.
Note: See "RADIO Cloning" on page 30 for more
details.
ROGER BEEP TONE
(END OF TRANSMISSION TONE)
This feature allows the radio to send a distinct
tone at the end of each transmission. The
Roger Beep default setting is set to OFF.
To toggle Roger Beep Tone on/off:
1. Short press the SB1 button while turning the
radio ON until a distinctive beep is heard, which
indicates that Roger Beep Tone is ON.
2. Repeat step one until the standard power-up
tone is heard, which indicates that Roger Beep
Tone is OFF.
Note: The tone sent at the end of each
transmission is intended to notify the
receiver that the transmission is complete.
KEYPAD BEEP
(RDM2080d MODEL)
This feature enables the radio to emit an
audible tone each time a button is pressed.
Turning this beep off enables silent menu
operation.
To toggle Keypad Beep on/off:
1. Short press SB2 button while turning the radio
ON. The keypad operation will be silent.
2. Repeat step one to activate the keypad beep.