User guide

ADVANCED
CONFIGURATION
English
39
ADVANCED
CONFIGURATION
Advanced Configuration is an optional
configuration mode that allows the
customization of additional features via the
front panel.
To establish a proper two-way communication,
the Channel, Frequency, and Interference
Eliminator Code must be the same on both
radios, which will depend on the stored profile
that has been pre configured on the radio.
ENTERING ADVANCED CONFIGURATION
MODE
To enter Advanced Configuration Mode, press
and hold both PTT and SB1 buttons
simultaneously for 3 to 5 seconds while turning
radio ON. The LED will start to blink green.
The RDM2080d will also show the icon
on the screen.
These features can be configured in Advanced
Configuration Mode:
FREQUENCY SELECTION
Any of the preset MURS frequencies can be
assigned to each channel. See "RDM Series
MURS Frequency Chart" on page 50.
CTSS/DPL CODES
This feature also called Interference Eliminator
Code, helps minimize interference by offering a
choice of code combinations that filter out
static, noise, and unwanted messages. See
code table "CTCSS and PL/DPL Codes" on
page 52 for specific code details.
AUTO SCAN
This feature enables to set a particular channel
to automatically start scanning each time that
channel is selected.