Important Safety Instruction Thank you for purchasing the JUKEBOX BAR 3801 Soundbar, Please read this user manual carefully and keep for future reference, Warning ee RISK OF ELECTRIC SHOCK] DO NOT OPEN TE REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) Caution: = To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture, No user serviceable parts inside.
The lightning flash within an equilateral triangle is intended to alert you to the presence of insulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to 2 Person or persons. important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual.
2. Never use the device unsupervised! Switch off the device whenever you are not using it, Sven if not using it only for a worthwhile, 3. The appliance is not intended to be operated by means of an external timer or separate remote control system, 4, If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazard, 5.
magnetic field, 11. Do not place the unit on a amplifier or receiver, 12. Do not place this unit in a damp area as the moisture will affect the life of electric components, 13. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth, 14. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord. 15.
Instructions. 5, Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus {including amplifiers) that produce heat. 6. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles or at the point where they exit from the apparatus. 7. Only use attachments/accessories specified by the manufacturer, 8. Unplug this apparatus during lightning storms or when unused for long periods of time. 9.
= The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom. = Do not install the product in the following areas: + Places exposed to direct sunlight or close to radiators. + Forefather stereo equipment that radiate too much heat-Blocking ventilation or ina dusty area, + Areas where there transubstantiation, * Humid or moist places. = Outplacement near candles or other flames. = Operate the product only as instructed in this manual.
Product Representation Sound Bar & Sub-Woofer LED Display HOR RACY OJ COAXIAL AUX DON SUB OUT MISUNDERSTAND VOL 9. VOLT 10. INPUT 11.
1.8 : Standby rode for power nonfood, 2. Pal: Connect or Disconnect to the Paling Device, {Press the Bunion more than 2 Seconds) 3. VOL Master Volume Up, 4. Wd: Previous Track (Only work under USB & BT Mode). 5. OWL-: Master Volume Down, 8. MUSIC Select the Music BQ effect. 7. THE Treble Volume Up. 8. TREE-: Treble Volume Down. 9. MUTE: Mute Mode, 10. INPUT: Input TT. wi: Nan Track {Only work under USE & BT modal. 12, Wf RESET Play/Pause : Play / Pause for Current Track (Only work under USB and BT mode).
Positioning the Sound Bar Place on a flat Surface Place the sound bar horizontally on a flat surface such as a TV unit or shelves and align it centrally with the TV screen, Allow some space between the speaker and the wall.
Follow below steps to mount the sound bar on the wall 1. Paste 2 pieces of EVA foam (with holes) on the two wall brackets aligning at the hole position of wall brackets. 2. Remove 4 screws from the rear housing of sound bar, then Insert the 4 screws over the wall bracket screw holes aligning (on the side of EVA foam pasted), and then fasten the screws again. 3. According to the two hanging wall positions on the rear of soundbar, calibrate and mark the two hanging brackets hole position on the wall.
OPERATE INSTRUCTIONS Setting the Soundbar 1. Plug in the external adapter and the display will light up (Standby mode) 2. Switch on the soundbar by using power button on soundbar of by using STANDBY button on remote. After switching on, the default input mode will appear on display. 3. Input mode can be changed by pressing the power button again or by using the INPUT button on remote. 4.
Powering On/Off 1. Plug the sound bar adapter imo a wall outlet, it will automatically enter standby mode. 2. Short-press the multi-function button to turn on the sound bar, 3. To turn off, press the STANDBY button on remote control or unplug from wall outlet, Playing Audio via BT Connection 1. Turn on sound bar and then short-press the milt-function button to switch to BT mode and the LED will show BT 2. Activate the pairing function on your phone of other compatible device and select "JUKEBOX BAR 3901".
pairing successfully connected device will be reestablished once you re-enter wireless range (10 meters), To connect to other devices, repeat the shove pouring steps.
Note: For some computers, you may need (o scenes the auto control pined to manually set the sound bor as below picture. (=o Bo) © ors Output HOMICIDAL) Made 1. The Soundbar supports HDMI with Audio Return Channel(ARC), If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable 2. Using a High Speed HDMI cable, connect the HDMI (ARC) connector on the soundbar to the HDMI ARC corrector on the TV. The HDMI ARC connector on the TV might be labeled differently.
Coaxial Mode Use this operating mode to play music from the Coaxial digital input for example from av on your soundbar (A). The TV must have an Coaxial digital output. Use the Coaxial cable to make the connection, Proceed as follows: 1. Connect the Coaxial cable to the Coaxial digital output of your Tv, 2. Then connect the Coaxial cable to the Coaxial digital input of your soundbar, 3. Startplayingonthe TV. 4. Switch to Coaxial input mode. 5.