User manual

63
HS1199-002_v01
Temperature setting can be adjusted from 100°C to 200°C.
Single pressing of the temperature setting buttons will increase or
decrease the temperature setting by 10°C.
When increasing the temperature, the set temperature value will blink on
the LCD display until the barrel reaches the set temperature.
TEMPERATURE SETTING
Temperature settings allow adjusting the temperature of the heating
surface to the structure and type of hair, which is to be styled.
Guidelines for selecting correct temperature:
Use lower temperature for soft, thin hair, and higher temperature for thicker and coarse
●
hair.
Start hair styling with lower temperature, check your hair and touch it; if more curling
●
is required increase the temperature and try again to work out the correct temperature
for your hair.
Too low temperature may not curl your hair or the result will not be long
lasting; too high temperature may burn your hair.
It is advisable to have one hour break between attempts not to damage
your hair.
HOW TO USE YOUR CURLING TONG
1
Wash your hair with shampoo and apply hair conditioner.
2
Dry your hair thoroughly and brush it.
3
Wrap a hair section of about 2,5 cm around the barrel and then clamp it with the
hair clip.
For tighter curls wrap smaller hair sections around the barrel, for looser
curls roll more hair.
4
Wind a hair section around the heated barrel and then wind the barrel towards the
scalp exactly as you would when using a roller. Hold each curl in place for around 8-12
seconds.
5
Gently unwind the hair section, open the clip and release the curl.