Specifications

Pg 5 of 8 IS2523-I8
Attach the 2 lower shelves (6) to the assem-
bly, using medium screws (B) in the front and
long screws (C) in the back.
Fije las 2 repisas inferiores (6) al ensamble
utilizando tornillos medianos (B) al frente y
tornillos largos (C) en la parte posterior.
Fixez les 2 étagères inférieures (6) au meu-
ble, à l'aide des vis moyennes (B) sur l'avant
et des vis longues (C) à l'arrière.
3.
NOTE: The cross wires
should be on the bottom.
NOTA: Los alambres o barras
transversales se deben
encontrar en la parte inferior.
REMARQUE : les fils transversaux
doivent se trouver sur le dessous.
B
C
NOTE: If these screw holes do not
line up with the screw holes in shelves
(6), then bottom sides (4) need to be
switched with each other.
NOTA: Si estos orificios para tornillos
no se alinean con los orificios para
tornillos en repisas (6), entonces los
marcos laterales inferiores (4) necesitan
ser intercambiados el uno con el otro.
REMARQUE : si les trous de ces vis
ne sont pas alignés avec les trous des
vis dans étagères (6), intervertissez les
montants latéraux inférieurs (4).
6