Owner`s manual

Insla/lation
NOTE: Not all;cables shown are included with the TV.
- To avoid picture noise (interference) leave an adequate distance between the VCR and TV,
Use the ISM Me{hod feature to avoid having a fixed image remain on the screen for a long period of time Typically a frozen still
picture from a VCR, if the 4:3 picture format is used the fixed image may remain visible on tile screen,
Connection 1
_t VCR switch to 3 or 4 and then tune TV to the same channel
number.
Connection 2
1. Connect the audio and video cables from the VCR's output lacks to
the TV input jacks, as shown in tl_e figure.
When connecting the TV to VCR, match tile iack colors (Video =
yellow, Audio Left = white and Audio Right = red).
2. Insert a video t_e into the VCR and press PLAY on the VCR,
(Refer to the VCR owner's manual.)
3. Use the INP_ SELECT button on the remote control to select
Video (Exp.).
® 0 @@0 ¢00 o
©
VCR
° After subscribing to a came TV service from a local provider and installing a converter, you can watch came TV programming.
* For further information regarding cable TV service, contact your _ocal cable TV service provider(s).
Connection 1
1. Select 3 or 4 w_th channel switch on cable
box.
2. Tune the TV channel to the _me selected
output channel of cable box.
3. Select channels at the cable box or w_h the
cable box remote control
® o o o _......"° o
® 0 @@@ @@@ o
Connection 2
1. Connect the audio and video cables from the
cable box's output jacks to the TV input
jacks as shown in the figure.
When connecting the TV to cable box, match
the jack co_ors (Video = yellow, Audio Left =
white and Audio Right =red).
2. Use the |NPUT SELECT button on the
remote contro_ to select Video (Exp.).
3. Select channels wilh the cable box remote
control
or
Cable Box
Owners Manual 13