Owner`s manual

Installation
How to connect
Connect the e_udioand video ceJNes from the external equipment's output
jacks to the TV input jacks, as sbown in the figure+
When connecting the TV to external equipment ma_ch the iack colors (Video
= yellow+ Audio Left = white, and Audio Right = red)
How to use
1. Use the _NPUT SELECT button on the remote control to select Video (Exp.).
2. Operate the corresponding external equipment. Refer to externa_ equipme_
operating guide.
_ O O O O O O O
® e oee oee e
Video Ga_ Sei
® • OO@ OOO e
How to connect
1, Connect the DVD video outputs to the COMPONENT iNPUT
jacks (Y, PB PR) and connect the DVD audio outputs to the
AUDiO iNPUT jacks.
2 ff your DVD only has an S-Video output jack, conne_ this to the
S-VIDEO input on the TV and connect the DVD audio outputs to
the AUD[O iNPUT jacks,
How to use
1. Turn on the DVD player, insert a DVD
2. Use the INPUT SELECT button on the remote control to select
Component (if connected to S-VIDEO_ select the S-Video
DVD
To watch digitally broadcast programs pur-
chase and connect a digita_ set4op box
This TV supports HDCP (High-bondwidfl_ DigffaJ
Contents Protection) protocol for D_
(480p 720p,1080i) modes_
How to connect
1. Use the TVs COMPONENT (Y, P_, PR) HNPUT,
RGS, or DW jack for video conn_ions,
depending on your set4op box connedor. Then
make the corresponding audio connections.
How to use
1. Turn on the d[gitat set4op box (Refer to the
owner's manu_ for the digital set-top box.)
2. Use INPUT SELECT on the remote control to
_lect Component, RGB or DVL
_+ e + "+ o o ;/ =, ,==
Digital Set4op box
14 Plasma TV