Owner`s manual

Operation
Screen Menu Options
- RGB (PC) mode only; This function doesn't work for RGB-DTV mode.
- Automatically adjusts picture position and minimizes image shaking
- After adjustment if the image is sti_[ not correct, your TV is functioning propedy but needs further adjustment
- Auto ¢edrJlg, and _u_cerd_, are not active in DVI mode.
1. Press the MENU button and tllen use A _V button to select the _ menu.
2. Press the I_ button and then use & / V button to select Auto cotl_lg,.
& Press _be i_ button to run Auto configure.
• When Auto _8, has finished, OK witU be shown on screen,
• If the position of the image is still not correct, try Auto adjustment again.
4. Jn RGB (PC) mode_ if the image needs to bie adjusted more after using Auto m_r_,,
you _n make further adjustments w_h the M_rmu_ ¢o_g, option
Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible.
Set every aspect ratio for RGB 480p.. DVI 480p, Component 480i/480p, 'Video, and SoVideo sources_
Use 4:3, or I6:9 for other input sources.
1. Press the ARC button repeatedly 1o select the desired picture format You can also adjust ARC in the $CR_ menu.
• 4:3
- Choose 4:3when you want to ,view a picture with an originat 4:3 aspect ratio, with gray bars appearing at both the
left and right sides.
• 16_9
° Choose 16,,9 when you want to adjust the picture horizontal_y_ in a _inear proportion to ill[ the entire screen.
• Horizon
Choose Horizon when you want to adiust the picture in a non4inear proportion, that is more enlarged at both sides
to cre_e a spectacul_ view.
° Choose Zoom when you want to view the picture without any a_teration. However, the top and bottom portions of the
picture will be cropp_
tu
o When enlarging or reducing the picture, the image may become distorted.
1. Use ZOOM+/ZOOM- button to enlarge or reduce the picture size.
, Zoom adjustment range is 100~300.
2. Adjust the main picture position using the A / V/41 / I_ buttons while in enlarged
picture mode
26 Plasma TV