Owner`s manual

ExternalControlDeviceSetup
08. Brightness (Command2:h)
• To adjust screen brightness.
You can also adjust brightness in the Video menu.
Transmission
[[k][h][ ][Set Ig][ ][gata][Cr] ]
Data Min:0~Max:64
• Refer 1o 'Real data mapping 1'. See page 35.
Acknowledgement
[[h][ ][Set Ig][ ][OK][gata][x] ]
09. Color (Command2:i)
• To adjust the screen color.
You can also adjust color in the Video menu.
Transmission
[[k][i][ ][Set Ig][ ][Data][Cr] ]
Data Min:0~Max64
• Refer to 'Real data mapping 1'. See page 35.
Acknowledgement
[[i][ ][Set ID][ ][OK][gatal[x] ]
10. Tint (Command2:j)
• To adjust the screen tint.
You can also adjust tint in the Video menu.
Transmission
[[k][j][ ][Set ID][ ][Data][Cr] ]
Data Red:O~Green:64
• Refer to 'Real data mapping 1'. See page 35.
Acknowledgement
[[j][ ][Set ID][ ][OK][Data][x] ]
11. Sharpness (Command2:k)
• To adjust the screen sharpness.
You can also adjust sharpness in the Video menu.
Transmission
[[k][k][ ][Set ID][ ][Data][Cr] I
Data Min: 0 ~ Max: 64
• Refer to 'Real data mapping 1'. See page 35.
Acknowledqement
[[k][ ][Set ID][ ][OK][Data][x] I
12. OSD Select (Command2:l)
• To select OSD (On Screen Display) on/off.
Transmission
[[k][I][ ][Set ID][ ][Data][Cr] ]
Data O:OSDoff l:0SDon
Acknowledgement
I[I][ ][Set ID][ ][OK][Data][x] I
36 Plasma TV
13. Remote Control Lock Mode (Command2:m)
• To lock the remote control and the front panel controls on
the TV.
Transmission
[[k][m][ ][Set Ig][ ][gata][Cr] ]
Data 0: Lock off 1: Lock on
Acknowleclqement
I[m][ ][Set Ig][ ][OKl[gata][x] I
• If you're not using the remote control and front panel con-
trols on the monitor, use this mode. When main power is
on/off, remote control lock is released.
14. PIP / DW (Command2:n)
• Tocontrolthe PIP (Picturein picture)/DW (Double Window).
You can also control the PIP!DW using the PIP or DW but-
ton on the remote control or in the PIP!DW menu.
Transmission
I[k][n][ ][Set ID][ ][Data][Cr]
Data O: PIP/DW off
1: PIP
Acknowledgement
I[n][ ][Set ID][ ][OK][Data][x]
I
2:DW1
3:DW2
15. PIP Aspect Ratio (Command2:o)
• To select the PIP picture format.
You can also select the PIP picture format using WIN.SIZE
on the remote control.
Transmission
I[k][o][ ][Set ID][ ][Data][Cr] I
Data 0:4:3 1:16:9
Acknowledgement
[[o][ ][Set ID][ ][OK][Data][x] ]
16. Split Zoom (Command2:p)
• To operate split zoom function and select the split
zoom section number.
Transmission
[[k][p][ ][Set ID][ ][gata][Cr] I
Data Min: 21 ~ Max: 99
• Refer to 'Real data mapping 2'
Acknowledgement
[[p][ ][Set ID][ ][OK][Data][x] I
* Real data mapping 2
21 : Selection 1 of 2 split zoom
24: Selection 4 of 2 split zoom
41 : Selection 1 of 4 split zoom
42: Selection 2 of 4 split zoom
44: Selection 4 of 4 split zoom
45: Selection 5 of 4 split zoom
91 : Selection 1 of 9 split zoom
99: Selection 9 of 9 split zoom