Owner`s manual

17. PIP Position (Command2:q)
I_ To select sub picture position for PIP.
You can also adjust the sub picture position using
WIN.POSITION on the remote control or in the PIPIDW
menu.
Transmission
[[k][q][ ][Set ID][ ][Data][Cr] J
Data 0: Right down on screen
1 Left down on screen
2: Left up on screen
3: Right up on screen
Acknowledgement
I[q] [ ][Set ID][ ][OK][Data][x] ]
18. Treble (Command2:r)
I_ To adjust treble.
You can also adjust treble in the Audio menu.
Transmission
[[kl[r][ ][Set Ig][ ][gata][Cr] J
Data Min: 0 ~ Max: 64
• Refer to 'Real data mapping 1'. See page 35.
Acknowledgement
[[r][ ][Set ID][ ][OK][Data][x] ]
19. Bass (Command2:s)
!_ To adjust bass.
You can also adjust bass in the Audio menu.
Transmission
[[k][s][ ][Set ID][ ][Data][Cr] J
Data Min: 0 _ Max: 64
• Refer to 'Real data mapping 1'. See page 35.
Acknowledgement
[[s][ ][Set ID][ ][OK][Data][x] ]
20. Balance (Command2:t)
I_ To adjust balance.
You can also adjust balance in the Audio menu.
Transmission
[[k][t][ ][Set ID][ ][Data][Cr] J
Data Min: 0 _ Max: 64
• Refer to 'Real data mapping 1'. See page 35.
Acknowledgement
[[t][ ][Set ID][ ][OK][Data][x] J
External Control Device Setup
21. Color Temperature (Command2:u)
I_ To adjust color temperature.
You can also adjust ACC in the Video menu.
Transmission
[[k][u][ ][Set ID][ ][Data][Cr] I
Data 0: Normal 1: Cool 2: Warm 3: User
Acknowledgement
[[u][ ][Set ID][ ][OK][Data][x] I
22. Red Adjustment (Command2:v)
I_ To adjust red in color temperature.
Transmission
[[k][v][ ][Set ID][ ][Data][Cr] ]
Data Min: 0 ~ Max: C8
• Refer 1o 'Real data mapping 3' as shown below.
Acknowledgement
[[v][ ][Set Ig][ ][OK][gata][x] J
23. Green Adjustment (Command2:w)
I_ To adjust green in color temperature.
Transmission
[[k][w][ ][Set ID][ ][Data][Cr] ]
Data Min: 0 ~ Max: C8
• Refer 1o 'Real data mapping 3' as shown below.
Acknowledgement
[[w][ ][Set ID][ ][OK][Data][x] J
24. Blue Adjustment (Command2:$)
I_ To adjust blue in color temperature.
Transmission
[[k][$][ ][Set ID][ ][Data][Cr] ]
Data Min: 0 ~ Max: C8
• Refer to 'Real data mapping 3' as shown below.
Acknowledgement
[[$][ ][Set ID][ ][OK][Data][x] J
* Real data mapping 3
0 :-20
5 :-19
A : -18
5F: -1
64:0
69:+1
!
C3:+19
C8:+20
Owner's Manual 37