848JG493A0 (712) English Owner’s manual Brushcutters Thank you for purchasing a Husqvarna Zenoah product. Before using our brushcutter, please read this manual carefully to understand the proper use of your unit. BC4500DW Español Manual de usuario Motoguadañas Gracias por comprar este producto Husqvarna Zenoah. Antes de usar nuestros productos, lea detenidamente este manual a fin de familiarizarse con el uso correcto de este aparato.
English Español 1. Explanation of pictorials (1) (2) (3) 1. Explicación de la simbología (4) (5) (6) (7) 15m (50ft) (1) Read owner’s manual before operating this machine. (2) Wear head, eye and ear protection. (3) Wear foot protection. (4) Wear gloves. (5) Beware of thrown objects. (6) Warning/Attention (7) Keep all children, bystanders and helpers 15 meters away from the machine. English (1) Lea el Manual de usuario antes de utilizar la máquina. (2) Utilizar protección en cabeza, ojos y oídos.
English Español 2. For safe operation 2. Para un Funcionamiento Seguro the unit where footing is unsteady or slippery. 13.Keep cutting attachment below waist level. 14.Keep all parts of your body away from the rotating cutting attachment and hot surfaces. 15.Warn the operator of the danger of blade thrust. (Kick back) Blade thrust may occur when the spinning blade contacts a solid object in the critical area. A dangerous reaction may occur causing the entire unit and operator to be thrust violently.
English F3-1 3. Setup 3. Montaje ■ ENGINE Using attached 4 socket screws, secure the connection firmly with equal force. ■ MOTOR Utilizando los 4 tornillos insertados, asegure la conexión firmemente con la misma fuerza. ■ HANDLE 1. Remove the upper cap from the bracket. 2. Loosen the 4 bolts on the clamp and insert the handles equally. Retighten the bolts. 3. Put the handle assembly into the bracket and put the upper cap over it. Tighten the cap securely. F3-2 Español F3-3 ■ MANGO 1.
English Español 4. Fuel 4. Combustible ADVERTENCIA WARNING • Keep open flames away from the area where fuel is handled or stored. • Mix and store fuel only in an approved gasoline container. • Evite llamas vivas en lugares en que se maneje o almacene combustible. • Mezcle y almacene el combustible sólo en recipientes para combustible aprobados. Mix a regular grade gasoline (leaded or unleaded, alcohol-free) and a qualityproven motor oil for air cooled 2 cycle engines.
English F5-1 a 2 F5-2 1 F5-3 Español 5. Use 5. Funcionamiento ■ STARTING THE ENGINE Take care that the cutting head will start rotating upon the engine starts. ■ ARRANCAR EL MOTOR Tenga cuidado con el cabezal de corte ya que empezará a girar una vez que el motor arranque. 1. Push the primer pump(1) several times until overflown fuel flows out in the clear tube. (F5-1) 2. Move the choke lever(2) to the closed position. (F5-1) 3. Set the engine switch(a) to the " I " position.
English 5. Use nut loose. Español 5. Funcionamiento (F5-7) c) Para el funcionamiento normal, mantenga la tuerca de mariposa floja. F5-8 F5-9 F5-10 ■ CUTTING WORK • By using the shoulder strap, hang the unit on your right side. Adjust the strap length so that the cutting head may become parallel to the ground. • Choose a suitable recommended cutting attachment according to the object to be cut. Never use other cutting attachment not approved by Husqvarna Zenoah.
English Español 6. Maintenance 6. Mantenimiento ADVERTENCIA WARNING Before cleaning, inspecting, or repairing the unit, make sure that the engine has stopped and is cool. Antes de limpiar, inspeccionar o reparar la unidad, asegúrese de que el motor se haya detenido y se encuentra frío. ■ BLADE Check the blade and the fasteners for looseness, cracking, or bending. ■ HOJA Compruebe la hoja y los sujetadores y determine si están sueltos, agrietados o doblados.
English Español 6. Maintenance 6. Mantenimiento ■ MAINTENANCE BEFORE STORAGE • Old fuel left in the carburetor may cause starting failure. When a series of operation finished, make sure to empty the fuel tank and drain the carburetor. • Check all parts and the functions. If the failured or damaged parts have been found, replace them with new ones. ■ MANTENIMIENTO ANTES DEL ALMACENAMIENTO • Si deja combustible en el carburador podría ocasionar fallas en el arranque.
English 7. Specifications MODEL CODE Overall size Length Width Height Dry Weight Engine Model Displacement Carburetor Fuel (Mixture ratio) Fuel Tank capacity Service range Spark plug Clutch system Anti-vibration system Housing Handle-bracket Gearhead Neck angle Reduction ratio Blade Rotation Handle Type Throttle lever Standard cutter Harness Type Quick release Standard Accessories Blade-cover Tool-kit Goggle Owner's manual Unit BC4500DW mm mm mm Kg 1860 630 510 7.3 G45L-D 41.
Español 7.
Head Office: 1-9, Minamidai, Kawagoe-city, Saitama, 350-1165 Japan Telephone: (+81)49-243-1117 Telecopier: (+81)49-243-7197