MSDS

Material Safety Data Sheet
Product Name
Hardwood & Laminate Floor Refinisher
Product code
ZUHFR
N
one.
Flash Point
N
ot determined.
National Fire Protection Association (U.S.A.)
1
0
0
Flammable Limits
Flammability
Fire hazard
May emit toxic fumes under fire conditions.
N
on-combustible.
Fire-Fighting
Procedures
Use dry chemical, CO
2
, water spray (fog) or foam. Cool closed containers exposed to fire with
water. Fire-fighters should wear appropriate protective equipment.
Section 5. Fire Fighting Measures
Spill Clean up
Put on appropriate personal protective equipment (see section 8). Stop leak if without risk. Move containers
from spill area. Dilute with water and mop up if water-soluble or absorb with an inert dry material and place in
an appropriate waste disposal container.
Section 6. Accidental Release Measures
Handling
Storage
Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Avoid breathing vapors of this product.
Do not ingest. Use only with adequate ventilation. Do not reuse container. Wash thoroughly after handling.
Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible
materials (see section 10) and food and drink. Store between the following temperatures: 40°F - 120°F (4.4°C - 49°C).
Keep out of the reach of children.
Section 7. Handling and Storage
Personal Protective Equipment (PPE)
Eyes
Body
Respiratory
Product name Exposure limits
DIPROPYLENE GLYCOL METHYL ETHER; dipropylene glycol
monomethyl ether
ACGIH TLV (United States, 1/2009). Absorbed through skin.
TWA: 100 ppm 8 hour(s).
TWA: 606 mg/m³ 8 hour(s).
STEL: 150 ppm 15 minute(s).
STEL: 909 mg/m³ 15 minute(s).
OSHA PEL 1989 (United States, 3/1989). Absorbed through skin.
TWA: 100 ppm 8 hour(s).
TWA: 600 mg/m³ 8 hour(s).
STEL: 150 ppm 15 minute(s).
STEL: 900 mg/m³ 15 minute(s).
NIOSH REL (United States, 6/2008). Absorbed through skin.
TWA: 100 ppm 10 hour(s).
TWA: 600 mg/m³ 10 hour(s).
STEL: 150 ppm 15 minute(s).
STEL: 900 mg/m³ 15 minute(s).
OSHA PEL (United States, 11/2006). Absorbed through skin.
TWA: 100 ppm 8 hour(s).
TWA: 600 mg/m³ 8 hour(s).
Safety glasses.
For prolonged or repeated handling, use gloves. Recommended:
Rubber gloves. Neoprene gloves. Nitrile gloves.
Use with adequate ventilation. A respirator is not needed under normal and
intended conditions of product use.
Section 8. Exposure Controls/Personal Protection
Physical State
pH
Boiling Point
Specific Gravity
Solubility
Thin liquid
8.0-9.0
100°C (212°F)
1.028
Color
Odor
Vapor Pressure
Vapor Density
Evaporation Rate
VOC (Consumer)
Milky-white
Mild. Ammoniacal.
N
ot determined.
N
ot determined.
1 (Water = 1)
38 (g/l). 0.32 lbs/gal (3.68%)
Easily soluble in the following materials: cold water
and hot water.
Section 9. Physical and Chemical Properties
The product is stable.
Will not occur.
Stability and Reactivity
Hazardous Decomposition Products
Hazardous Polymerization
Keep away from heat, sparks and flame. Reactive or incompatible with the following materials:
oxidizing materials.
Incompatibility
carbon oxides (CO, CO
2
), acrylic monomers
Section 10. Stability and Reactivity
Page: 2/4