SDS

SAFETY DATA SHEET
ZEP INSTANT HAND SANITIZER GEL 70% W/PUMP 4-1GL
Version 1.3
Revision Date 01/22/2021
Print Date 02/23/2021
4 / 11
If the product contaminates rivers and lakes or drains, inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
Avoid formation of aerosol.
Avoid contact with eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Take precautionary measures against static discharges.
Dispose of rinse water in accordance with local and national
regulations.
Conditions for safe storage
:
No smoking.
Keep container tightly closed in a dry and well-ventilated
place.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Observe label precautions.
Materials to avoid
:
Strong oxidizing agents
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
ethanol
64-17-5
TWA
1,000 ppm
ACGIH
TWA
1,000 ppm
1,900 mg/m3
NIOSH REL
TWA
1,000 ppm
1,900 mg/m3
OSHA Z-1
TWA
1,000 ppm
1,900 mg/m3
OSHA P0
STEL
1,000 ppm
ACGIH
PEL
1,000 ppm
1,900 mg/m3
CAL PEL
Engineering measures
:
No special ventilation requirements necessary during product
use. In the workplace or during a spill, utilize effective
exhaust ventilation.
Personal protective equipment
Respiratory protection
:
No personal respiratory protective equipment normally
required.
In the workplace- If a significant exposure or spill occurs, use
respiratory protection unless adequate local exhaust