Installation Guide

Installation – Recirculating
11
2. Using components from ZRC-0200, install (2)
charcoal fi lter brackets and center panel to
bottom of the hood with (4) screws for each
component. Screws are pre-installed to the hood.
Remove screws fi rst to install brackets and center
panel then re-install screws..
3. Install charcoal fi lters into charcoal fi lter brackets 4. Install the Aluminum mesh or Baffl e fi lters
Note: To use hood in air recirculating mode please purchase recirculating kit ZRC-0200
charcoal fi lter
bracket
center
panel
charcoal fi lter
bracket
1. Remove air diverter plate slot covers. Remove metal
air diverter plate from front slot and re-position to back
slot. Re-install air diverter plate covers.
back slot
front slot
metal air
diverter
plate