Use and Care Manual

ManualsBrandsZephyr ManualsAppliancesPresrv 5.6 cu. ft. Convertible Beer Kegerator in Stainless Steel with 107-Can Beverage Storage

26

PRKB24C01AG & PRKB24C01AS-OD Use, Care, and Installation Guide

KEGERATOR &

BEVERAGE COOLER

INDOOR & OUTDOOR

PRESRV™

Installation Instructions

2. Remove the black plastic insulation

cap from the kegerator and slide the

kegerator under the countertop and

plug it in (FIG. M). Do not power on the

kegerator yet.

3. Remove the air conduit from the beer line

cooling system inside the kegerator by

removing (2) screws (FIG. N).

4. Install the adjustable insulation tube

through the top of the countertop and

into the kegerator. Use the insulation tube

gasket to secure the insulation tube to the

ceiling of the kegerator using the included

(3) ST*12 screws shown in FIG. O.

NOTE: If you are using the built-in kit, there

is no need to install the black rubber ﬂange

included with the tap kit. The rubber ﬂange

that is part of the adjustable insulation tube

is sucient to create a seal.

Black Plastic

Insulation Cap

FIG. M

Air Conduit

FIG. N

FIG. O

Insulation Tube Gasket

Adjustable

Insulation

Tube

Built-In Kit Installation