WWW.ZEPHYRONLINE.COM Napoli ZNA-M90DS, ZNA-E42DS EN Use, Care, and Installation Guide FR Guide d’utilisation, d’entretien et d’installation C TM Airflow Control Technology NOV20.
CORE NAPOLI ISLAND 2 Napoli Use, Care, and Installation Guide
Contents ZEPHYRONLINE.COM Page Safety Information ............................................................................ 4-6 Types of Safety Warnings ................................................................... 4 General Safety ..................................................................................4-5 Operation ........................................................................................... 6 Electrical Requirements ........................................................
CORE Safety Information NAPOLI ISLAND READ AND SAVE THESE INSTRUCTIONS Your safety and the safety of others are very important. We have provided many important safety messages in this manual for your appliance. Always read and obey all safety messages. WARNING WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: a) Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer. This is the Safety Alert Symbol.
Safety Information ZEPHYRONLINE.COM READ AND SAVE THESE INSTRUCTIONS WARNING WARNING - TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWINGa: a) SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT. b) NEVER PICK UP A FLAMING PAN – You may be burned.
CORE Safety Information NAPOLI ISLAND READ AND SAVE THESE INSTRUCTIONS Operation Ź Always leave safety grilles and filters in place. Without these components, operating blowers could catch onto hair, fingers and loose clothing. Ź The manufacturer declines all responsibility in the event of failure to observe the instructions given here for installation, maintenance and suitable use of the product.
List of Materials ZEPHYRONLINE.
CORE Installation Instructions NAPOLI ISLAND Ducting Calculation Sheet Equivalent number length x used = Duct pieces 1 Ft. x( ) = Ft. 6”, 7”, 8”, 10” 1 Ft. Round, straight x( ) = Ft. 3-1/ 4” x 10” Rect. 900 elbow 15 Ft. x( ) = Ft. 3-1/ 4” x 10” Rect. 450 elbow 9 Ft. x( ) = 3-1/ 4” x 10” Rect., straight 3-1/ 4” x 10” Rect. 900 flat elbow 24 Ft. x( 7” to 6” or 25 Ft. 8” to 7” Round tapered reducer x( 15 Ft. x( 6”, 7“, 8” Round in-line damper 6”, 7”, 8”, 10” 15 Ft.
Installation Instructions ZEPHYRONLINE.COM Mounting Height, Clearance, & Ducting A n. i m . B n mi x. C ma D n. i m . E n mi x. F ma in..
CORE Installation Instructions NAPOLI ISLAND Mounting Height, Clearance, & Ducting A minimum of 8” round duct is recommended to maintain maximum air flow efficiency. Always use rigid type metal ducts only. Flexible ducts could restrict air flow by up to 50%. Also use the ducting calculation sheet (on page 11) to compute total available duct run when using elbows, transitions and caps. ALWAYS, when possible, reduce the number or transitions and turns.
Installation Instructions ZEPHYRONLINE.COM Ducting Options WARNING Fire Hazard: NEVER exhaust air or terminate ductwork into spaces between walls, crawl spaces, ceilings, attics, or garages. All exhaust must be ducted to the outside, unless using the recirculating option. Ź Use single wall rigid metal ductwork only. Ź Fasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or Duct Tape.
CORE Installation Instructions NAPOLI ISLAND Ů 9-13/16” 12-13/16” 6-1/2” STANDARD min. ducted- 32” min. recirc. - 36-1/2” max. - 50” 10-5/16” 13-1/8” Z1C-02NA min. ducted - 49” min. recirc. - 53-1/2” max. - 80” 35-7/16”, 41-15/16” 25-9/16” SIDE C/L 7/8” 10-1/16” 5-5/16” 1-1/8” FRONT 6-3/4” Elec.
Installation Instructions ZEPHYRONLINE.COM Electrical Supply WARNING Electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards. Turn off electrical power at service entrance before wiring. For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use extension cord or adapter plug with this appliance. Follow national electrical codes or prevailing local codes and ordinances.
CORE Installation Instructions NAPOLI ISLAND Mounting the Hood CAUTION Hood is intended to be mounted to a finished ceiling. Front of Hood B Ceiling Preparation 1. Determine hood mounting location and temporarily tape paper template (included with the hood) to the ceiling. 2. Cut-out internal shaded area of template to allow the ducting and electrical to pass through. XP022220 3. Add wood blocking (min. 2” x 4”) onto ceiling joists to reinforce ceiling above the drywall. (FIG. C1). 4.
Installation Instructions ZEPHYRONLINE.COM Mounting the Hood FIG.
CORE Installation Instructions NAPOLI ISLAND Mounting the Hood 1 2 FRONT FRONT FIG. E FIG. F 7. Hood heights between 40” to 50” require lateral support brackets to be installed to the two top support frame cut off arms and their corresponding bottom support frame arms. Install lateral support brackets by (12) M4 x 8 sheet metal screws shown in FIG. D. 8. Hood heights between 45” to 50” require a square support bracket to be installed inside the support frame.
Installation Instructions ZEPHYRONLINE.COM Mounting the Hood FIG. H FIG. G 11. Lift hood and align the (4) pre-installed mounting screws located on top of the unit body (FIG. C4) with the (4) key holes on the bottom of support frame. Slide hood towards the narrow end of key holes to lock into place. Hand tighten each of the (4) screws with a screwdriver to secure hood to bottom support frame. Further secure bottom support frame to unit body by one M4 x 12 safety screw (FIG. H). 12.
CORE Installation Instructions NAPOLI ISLAND Mounting the Hood 1 Top Support Frame Top Duct Covers Bottom Duct Covers Bottom Support Frame FIG.
Installation Instructions ZEPHYRONLINE.COM Ductless Recirculation Ductless recirculation is intended for applications where an exhaust duct work is not possible to be installed. When converted, the hood functions as a recirculating hood rather than an exhaust hood. Fumes and exhaust from cooking are drawn and filtered by a set of optional charcoal filters. The air is then purified and re-circulated back within the home.
CORE Installation Instructions NAPOLI ISLAND 5. Enable recirculating mode on the proximity controls. (Refer details to pg. 23) 6. Charcoal filters must be replaced after every 200 hours of use (or approximately every 3 to 6 months based on the average of 1 - 2 hours of daily cooking time). After 200 hours of use, the notification bell icon will display. When the bell is tapped, the LCD display will cycle between showing “REPLACE CHARCOAL FLTR” and “HOLD UP TO RESET” every 2 seconds.
Features & Controls ZEPHYRONLINE.COM Proximity Controls Power Lights Display & Icons Adjust 6 Speed Levels PROXIMITY SENSOR Ź When approaching the hood while it is powered off, the Power, Fan Decrease, Fan Increase, and Light icons will illuminate, and “HELLO” will appear on the LCD display for 2 seconds. Ź If neither the fan nor lights are turned on within 60 seconds, the icons will turn off, and “GOODBYE” will appear on the LCD display for 2 seconds.
CORE Features & Controls NAPOLI ISLAND Proximity Controls DISPLAY ICONS & FUNCTIONS Ů Ź The notification bell icon will illuminate when an action needs to be taken. Tapping the icon will cycle through the notifications. The notification bell will remain illuminated until all notifications are resolved. The notification bell will not illuminate when the hood and controls are powered off. Bluetooth® Ź The Bluetooth® icon will illuminate the device when connected with the hood via Bluetooth®.
Features & Controls ZEPHYRONLINE.COM Proximity Controls Ļ Ů Ź Airflow Control Technology (ACT™) allows the installer to set the maximum fan CFM to align with local codes and regulations. When the fan is off, press and hold for 3 seconds to display ACT™ status. Ź ACT 290 = 3 speeds, ACT 390 = 4 speeds, ACT 590 = 5 speeds. Grease Filter Clean Reminder Ź After 60 hours of fan use, the notification bell icon will illuminate.
CORE Features & Controls NAPOLI ISLAND Zephyr Connect Votre hotte de cuisine est compatible avec notre application Zephyr Connect. Tout ce dont vous avez besoin est une connexion WiFi avec accès à Internet qui peut atteindre l’emplacement de votre hotte. Zephyr Connect vous permet de contrôler votre hotte de cuisine de n’importe où à l’aide d’un appareil mobile ou de votre enceinte intelligente Amazon Alexa ou Google Home.
Features & Controls ZEPHYRONLINE.
CORE Features & Controls NAPOLI ISLAND Optional RF Remote Control To order the RF remote control, the part number is 14000005. The blue antenna wire needs to be extended for optimal signal. Unwrap the antenna wire and position it behind the duct cover. It does not need to be secured. FCC Caution To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Features & Controls ZEPHYRONLINE.COM Optional RF Remote Control RF Remote Features The RF remote control is equipped with a magnet on the back for easy storage. The remote may be placed on any magnetic surface such as a refrigerator or the Zephyr remote holder, FIG. K. The remote holder can be inserted into a standard electrical outlet for easy storage. Note: The remote holder does not charge the RF remote. Maximum remote control communication distance is 15 feet from the liner. FIG.
CORE Maintenance NAPOLI ISLAND Hood & Filter Cleaning Surface Maintenance Ź Do not use corrosive detergents, abrasive detergents or oven cleaners. Ź Do not use any product containing chlorine bleach or any product containing chloride. Ź Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface. Cleaning Stainless Steel Clean periodically with warm soapy water and clean cotton cloth or micro fiber cloth. Always rub in the direction of the stainless steel grain.
Maintenance ZEPHYRONLINE.COM Ų Ĭ Ę ĭė 1. Pull on latch to disengage filter. 2. Pull down on filter handle to remove filter. Ų Hood Model Part Number ZNA-M90DS ZNA-E42DS 50210037 50210037 Qty. to Order 2 2 To order parts, visit us online at http://store.zephyronline.com. Napoli Use, Care, and Installation Guide FIG.
CORE Maintenance NAPOLI ISLAND LumiLight LED In the unlikely event that your LumiLight LED fails, please contact Zephyr to order replacement parts. See the list of parts and accessories page for part numbers and contact information. Ĭ Ę ĭė 1. Remove baffle filters. 2. Remove each side panels by two screws and light panel by two screws. 3. Disconnect LED light quick connector. 4. Push in the two side clips on the ends of the LED light. 5. Push LED light through the light panel opening.
ACT™ Conversion ZEPHYRONLINE.COM ů Ĭ Ļĭ Some local codes limit the maximum amount of CFM a range hood can move. ACT™ allows you to control the maximum blower CFM of select Zephyr Ventilation range hoods without the need for expensive make up air kits. ACT™ enables the installer to easily set the maximum blower speed to one of three most commonly specified CFM levels; 590, 390, or 290 CFM. The usage of ACT™ may not be necessary for your installation.
CORE ACT™ Conversion NAPOLI ISLAND Enabling ACT™ Before hood installation, gain access to PC board by following the steps below: 1. PC board is located on top of motor housing. Unscrew (4) screws and remove PC board from PC board box shown in FIG. O. NOTE: Take care when removing PC board as there are many wires connected to the board. Disconnecting all the wires is not necessary as long as you can easily access the jumper pins shown in FIG. P. 2. Change plastic jumper position as shown in FIG. P.
Wiring Diagram ZEPHYRONLINE.COM Green White Black WIRING DIGRAM Napoli Use, Care, and Installation Guide LED LED LED LED MOTOR Green Red White White Black ZNA-M90DS Model: ZNA-E42DS Voltage: 120VAC 60Hz Power consumption Lamp: LED 6W Max.
CORE Troubleshooting NAPOLI ISLAND Possible Problem After installation, the unit doesn’t work. Light works, but blower is not turning. The unit is vibrating. Possible Cause Solutions The power source is not turned ON. Make sure the circuit breaker and the unit’s power is ON. The power line and the cable locking connector is not connecting properly. The switch board or control board wirings are disconnected. The switch board or control board is defective. The wires on control board are loose.
Troubleshooting ZEPHYRONLINE.COM Possible Problem The hood is not venting out properly. The unit turns on by itself. Filter is vibrating. RF Remote control does not work. Possible Cause Using the wrong size of ducting. Change the ducting to the correct size. The hood might be hanging to high from the cook top. Adjust the distance between the cook top and the bottom of the hood within 24” and 34” range. Close all the windows and doors to eliminate the outside wind flow.
CORE Troubleshooting NAPOLI ISLAND Possible Problem The range hood won’t connect to Wi-Fi. User cannot change Wi-Fi connections. Cannot bind the hood to my Zephyr Connect account. Zephyr Connect app won’t register user inputs. Zephyr Connect app stuck on “Loading”. 36 Possible Cause Solutions The user’s router or modem is turned off. The user’s router is connected to a 5 GHz wireless frequency. The user’s coaxial cables are loose. Turn on the router or modem. Connect to the 2.
List of Parts & Accessories ZEPHYRONLINE.COM Description Replacement Parts LumiLight LED, 6W Baffle Filter Optional Accessories Recirculating Kit Replacement Charcoal Filter RF Remote Control Duct Cover Extension Make-up Air Kit Part Number Z0B0047 50210037 ZRC-03NA Z0F-C005 14000005 Z1C-02NA MUA008A To order parts, visit us online at http://store.zephyronline.com.
CORE Notes NAPOLI ISLAND 38 Napoli Use, Care, and Installation Guide
Limited Warranty ZEPHYRONLINE.
CORE Product Registration NAPOLI ISLAND Congratulations on the purchase of your Zephyr product! Please take a moment to register your new Zephyr product at www.zephyronline.com/registration IT’S IMPORTANT Prompt registration helps in more ways than one. Ensures warranty coverage should you need service. Ownership verification for insurance purposes. Notification of product changes or recalls. Zephyr Ventilation | 2277 Harbor Bay Pkwy. | Alameda, CA 94502 | 1.888.880.
WWW.ZEPHYRONLINE.COM Napoli ZNA-M90DS, ZNA-E42DS EN Use, Care, and Installation Guide FR Guide d’utilisation, d’entretien et d’installation C TM Airflow Control Technology NOV20.
CORE NAPOLI ÎLE 2 Napoli Guide d’utilisation, d’entretien et d’installation
Table des matières ZEPHYRONLINE.COM Page Consignes de sécurité ....................................................................... 4-6 Types d’avertissements de sécurité ..................................................... 4 Sécurité générale...............................................................................4-5 Opération ........................................................................................... 6 Exigences électriques .......................................................
CORE Consignes de sécurité NAPOLI ÎLE LISEZ ET CONSERVEZ CES INSTRUCTIONS Votre sécurité et celle des gens qui vous entourent sont très importantes. Ce manuel contient de nombreux messages de sécurité relatifs à votre appareil. Lisez tous les messages et conformez-vous-y en tout temps. AVERTISSEMENT AVERTISSEMENT - POUR RÉDUIRE LES RISQUES D’INCENDIE, DE CHOC ÉLECTRIQUE OU DE BLESSURES AUX PERSONNES, RESPECTEZ LES SUIVANTS: a) N’utilisez cet appareil que de la manière prévue par le fabricant.
Consignes de sécurité ZEPHYRONLINE.
CORE Consignes de sécurité NAPOLI ÎLE LISEZ ET CONSERVEZ CES INSTRUCTIONS Opération Ź Laissez toujours les grilles de sécurité et les filtres en place. Sans ces composants, les soufflantes en fonctionnement pourraient s’accrocher aux cheveux, aux doigts et aux vêtements amples. Ź Le fabricant décline toute responsabilité en cas de non-respect des instructions données ici pour l’installation, la maintenance et l’utilisation appropriée du produit.
Liste de matériel ZEPHYRONLINE.
CORE Instructions d’installation NAPOLI ÎLE Feuille de calcul pour le conduit d’aération Longueur x Nombre utilisé Pièces de conduit 1 pi x( ) = pi 6”, 7”, 8”, 10” 1 pi circ., droit x( ) = pi 3-1/ 4” x 10” rect., coude à 90º 15 pi x( ) = pi 3-1/ 4” x 10” rect., coude à 45º 9 pi x( ) = pi 6” circ. à rect. de 3-1/4" x 10" pi 16 pi 6” circ. à rect. de 3-1/4" x 10", coude à 90º pi 7” circ. à rect. de 3-1/4" x 10" 3-1/ 4” x 10” rect., droit 3-1/ 4” x 10” rect.
Instructions d’installation ZEPHYRONLINE.COM Hauteur de montage, dégagement et gaine A n. mi . B n mi x. C ma D n. i m . E n mi x. F ma in..
CORE Instructions d’installation NAPOLI ÎLE Hauteur de montage, dégagement et gaine Un conduit rond d’au moins 8 po est recommandé pour maintenir une efficacité maximale du débit d’air. Utilisez toujours uniquement des conduits métalliques de type rigide. Les conduits flexibles peuvent restreindre le débit d’air jusqu’à 50%.
Instructions d’installation ZEPHYRONLINE.COM Options de conduits ATTENTION Risque d’incendie: NE JAMAIS évacuer l’air ni terminer de conduits dans des espaces entre les murs, les vides sanitaires, les plafonds, les greniers ou les garages. Tout l’échappement doit être canalisé vers l’extérieur, à moins d’utiliser l’option de recirculation. Ź Utilisez uniquement des conduits métalliques rigides à paroi simple.
CORE Instructions d’installation NAPOLI ÎLE ¯ Ů 9-13/16 po 12-13/16 po 10-5/16 po 13-1/8 po 6-1/2 po STANDARD Min. avec conduit - 32 po Min. avec reprise d’air - 36-1/2 po max. - 50 po Z1C-02NA Min. avec conduit - 49 po Min. avec reprise d’air - 53-1/2 po max.
Instructions d’installation ZEPHYRONLINE.COM Fourniture électrique ATTENTION Le câblage électrique doit être effectué par des personnes qualifiées conformément à tous les codes et normes applicables. Cette hotte doit être correctement mise à la terre. Coupez l’alimentation électrique à l’entrée de service avant le câblage. Pour votre sécurité personnelle, retirez le fusible de la maison ou ouvrez le disjoncteur avant de commencer l’installation.
CORE Instructions d’installation NAPOLI ÎLE Montage de la hotte ATTENTION La hotte est destinée à être montée sur un plafond fini. Devant du capot B Préparation du plafond 1. Déterminez l’emplacement de montage de la hotte et collez temporairement le gabarit en papier (inclus avec la hotte) au plafond. Zone de découpage ombragée 2. Découpez la zone ombrée interne du gabarit pour permettre le passage des conduits et de l’électricité. XP022220 3. Ajouter des blocs de bois (min.
Instructions d’installation ZEPHYRONLINE.COM Montage de la hotte FIG.
CORE Instructions d’installation NAPOLI ÎLE Montage de la hotte 1 2 FRONT FRONT FIG. E FIG. F 7. Les hauteurs de capot entre 40 po et 50 po nécessitent que des supports latéraux soient installés sur les deux bras coupés du cadre de support supérieur et leurs bras de cadre de support inférieurs correspondants. Installez les supports latéraux à l’aide de (12) vis à tôle M4 x 8 illustrées à la FIG. D. 8.
Instructions d’installation ZEPHYRONLINE.COM Montage de la hotte FIG. H FIG. G 11. Soulevez le capot et alignez les (4) vis de montage préinstallées situées sur le dessus du corps de l’unité (FIG. C4) avec les (4) trous de clé sur le bas du cadre de support. Faites glisser le capot vers l’extrémité étroite des trous de clé pour verrouiller en place. Serrez à la main chacune des (4) vis avec un tournevis pour fixer la hotte au cadre de support inférieur.
CORE Instructions d’installation NAPOLI ÎLE Montage de la hotte 1 Cadre de support supérieur Couvre-conduits supérieurs Couvercles de conduit inférieurs Cadre de support inférieur FIG. I 18. Assemblez les couvercles de conduit inférieurs ensemble sur les couvercles de conduit supérieurs et fixez-les ensemble par des bandes magnétiques. Les couvercles de conduit inférieurs doivent reposer sur le dessus du corps de la hotte.
Instructions d’installation ZEPHYRONLINE.COM Recirculation sans conduit La recirculation sans conduit est destinée aux applications où un conduit d’évacuation ne peut pas être installé. Une fois convertie, la hotte fonctionne comme une hotte à recirculation plutôt que comme une hotte aspirante. Les fumées et les gaz d’échappement de la cuisson sont aspirés et filtrés par un ensemble de filtres à charbon en option. L’air est ensuite purifié et recirculé dans la maison.
CORE Instructions d’installation NAPOLI ÎLE 6. Les filtres à charbon doivent être remplacés toutes les 200 heures d’utilisation (ou environ tous les 3 à 6 mois sur la base d’une durée moyenne de 1 à 2 heures de cuisson par jour). Après 200 heures d’utilisation, l’icône de la cloche de notification s’affiche. Lorsque vous appuyez sur la cloche, l’écran LCD alterne entre l’affichage de «REPLACE CHARCOAL FLTR» et «HOLD UP TO RESET» toutes les 2 secondes.
Fonctionnalités et commandes ZEPHYRONLINE.COM Contrôles de proximité Allumer Lumières ű Ù Ajuster 6 niveaux de vitesse CAPTEUR DE PROXIMITÉ Ź Lorsque vous vous approchez de la hotte lorsqu’elle est hors tension, les icônes d’alimentation, de diminution du ventilateur, d’augmentation du ventilateur et d’éclairage s’allument et «BONJOUR» apparaît sur l’écran LCD pendant 2 secondes. Ź Les icônes restent allumées pendant que le capteur de proximité détecte quelqu’un près de la hotte.
CORE Fonctionnalités et commandes NAPOLI ÎLE Contrôles de proximité Lumières Ź Appuyez sur l’icône des lumières pour changer le niveau d’éclairage de 1, 2, 3, désactivé. AFFICHER ICÔNES et FONCTIONS Ů Ź L’icône de la cloche de notification s’allumera lorsqu’une action doit être entreprise. Appuyez sur l’icône pour parcourir les notifications. La cloche de notification restera allumée jusqu’à ce que toutes les notifications soient résolues.
Fonctionnalités et commandes ZEPHYRONLINE.COM Contrôles de proximité ¯Ů Ļ Ź La technologie de contrôle du flux d’air (ACT™) permet à l’installateur de régler le CFM maximum du ventilateur pour s’aligner sur les codes et réglementations locaux. Lorsque le ventilateur est éteint, appuyez et maintenez pendant 3 secondes pour afficher l’état ACT™. Ź ACT 290 = 3 vitesses, ACT 390 = 4 vitesses, ACT 590 = 5 vitesses.
CORE Fonctionnalités et commandes NAPOLI ÎLE Zephyr Connect Votre hotte de cuisine est compatible avec notre application Zephyr Connect. Tout ce dont vous avez besoin est une connexion WiFi avec accès à Internet qui peut atteindre l’emplacement de votre hotte. Zephyr Connect vous permet de contrôler votre hotte de cuisine de n’importe où à l’aide d’un appareil mobile ou de votre enceinte intelligente Amazon Alexa ou Google Home.
Fonctionnalités et commandes ZEPHYRONLINE.
CORE Fonctionnalités et commandes NAPOLI ÎLE Télécommande RF en option Pour commander la télécommande RF, la référence est 14000005. Le fil d’antenne bleu doit être rallongé pour un signal optimal. Déroulez le fil d’antenne et placez-le derrière le couvercle du conduit. Il n’a pas besoin d’être sécurisé.
Fonctionnalités et commandes ZEPHYRONLINE.COM Télécommande RF en option Caractéristiques de la télécommande RF La télécommande RF est équipée d’un aimant à l’arrière pour un rangement facile. La télécommande peut être placée sur n’importe quelle surface magnétique telle qu’un réfrigérateur ou le support de télécommande Zephyr, FIG. K. Le support à distance peut être inséré dans une prise électrique standard pour un rangement facile. Remarque: le support de télécommande ne charge pas la télécommande RF.
CORE Entretien NAPOLI ÎLE Ů Entretien de surface Ź N’utilisez pas de détergents corrosifs, de détergents abrasifs ou de nettoyants pour four. Ź N’utilisez aucun produit contenant un agent de blanchiment chloré ou un produit contenant du chlorure. Ź N’utilisez pas de laine d’acier ou de tampons à récurer abrasifs qui pourraient rayer et endommager la surface.
Entretien ZEPHYRONLINE.COM Ů ¯ů Ĭ Ę ĭė 1. Tirez sur le loquet pour désengager le filtre. 2. Tirez sur la poignée du filtre pour retirer le filtre. Ů ¯ů Modèle de hotte ZNA-M90DS ZNA-E42DS Numéro de pièce 50210037 50210037 Quantité 2 2 Pour commander des pièces, visitez-nous en ligne à http://store.zephyronline.com. Napoli Guide d’utilisation, d’entretien et d’installation FIG.
CORE Entretien NAPOLI ÎLE LumiLight LED Dans le cas peu probable où votre LumiLight LED tombe en panne, veuillez contacter Zephyr pour commander des pièces de rechange. Voir la page de la liste des pièces et accessoires pour les numéros de pièces et les coordonnées. Ĭ Ę ĭė 1. Retirez les filtres déflecteurs. 2. Retirez chaque panneau latéral par deux vis et le panneau lumineux par deux vis. 3. Débranchez le connecteur rapide de la lumière LED. 4.
Conversion ACT™ ZEPHYRONLINE.COM Ù ¯ Ġ Ĭ Ļĭ Certains codes locaux limitent la quantité maximale de CFM qu’une hotte de cuisinière peut déplacer. ACT™ vous permet de contrôler le CFM maximum du ventilateur de certaines hottes de cuisinière Zephyr Ventilation sans avoir besoin de kits d’air d’appoint coûteux. ACT™ permet à l’installateur de régler facilement la vitesse maximale du ventilateur à l’un des trois niveaux CFM les plus couramment spécifiés; 590, 390 ou 290 CFM.
CORE Conversion ACT™ NAPOLI ÎLE Activer ACT™ Avant l’installation de la hotte, accédez au tableau de circuits imprimés en suivant les étapes cidessous: 1. La carte de circuit imprimé est située au-dessus du boîtier du moteur. Dévissez les (4) vis et retirez la carte de circuit imprimé du boîtier de carte de circuit imprimé illustré à la FIG. O. REMARQUE: Faites attention lorsque vous retirez la carte de circuit imprimé car de nombreux fils sont connectés à la carte.
Schéma de câblage ZEPHYRONLINE.COM Vert Blanc Noir SCHÉMA LED LED Napoli Guide d’utilisation, d’entretien et d’installation LED MOTEUR Corps Vert Rouge Blanc Blanc Noir ZNA-M90DS Modèle: ZNA-E42DS Voltage: 120VAC 60Hz Consommation d'énergie Lampe: LED 6W Max.
CORE Dépannage NAPOLI ÎLE Possible Problem Après l'installation, l'appareil ne fonctionne pas. La lumière fonctionne, mais le ventilateur ne tourne pas. L'unité vibre. L'unité siffle. Le ventilateur fonctionne, mais les LED LumiLight ne le sont pas. 34 Possible Cause Solutions La source d'alimentation n'est pas allumée. Assurez-vous que le disjoncteur et l’appareil sont sous tension. La ligne d'alimentation et le connecteur de verrouillage du câble ne se connectent pas correctement.
Dépannage ZEPHYRONLINE.COM Problème possible La hotte ne s'échappe pas correctement. Cause possible Utilisation de la mauvaise taille de conduit. Changer le conduit à la bonne taille. La hotte est peut-être suspendue trop haut de la table de cuisson. Ajustez la distance entre la plaque de cuisson et le bas de la hotte dans les limites de 24 po et 34 po. Fermez toutes les fenêtres et portes pour éliminer le vent extérieur.
CORE Dépannage NAPOLI ÎLE Problème possible Cause possible La hotte ne se connecte Le routeur ou le modem de pas au Wi-Fi. l’utilisateur est désactivé. Le routeur de l’utilisateur est connecté à une fréquence sans fil de 5 GHz. Les câbles coaxiaux de l’utilisateur sont desserrés. Le Wi-Fi sur le téléphone de l'utilisateur est désactivé. L'utilisateur se connecte au mauvais réseau Wi-Fi. La hotte n'est pas à portée de la connexion Wi-Fi. Des obstacles bloquent la force du signal Wi-Fi.
Liste des pièces et accessoires ZEPHYRONLINE.COM La description Pièces de rechange LumiLight LED, 6W Filtre à chicane Numéro d’article Z0B0047 50210037 Accessoires optionnels Kit de recirculation Filtre à charbon de rechange Télécommande RF Extension de couvercle de conduit Kit air d'appoint ZRC-03NA Z0F-C005 14000005 Z1C-02NA MUA008A Pour commander des pièces, visitez-nous en ligne à http://store.zephyronline.com.
CORE Remarques NAPOLI ÎLE 38 Napoli Guide d’utilisation, d’entretien et d’installation
Garantie limitée ZEPHYRONLINE.
CORE Enregistrement du produit NAPOLI ÎLE Nous vous félicitons d’avoir acheté une produit Zephyr. Veuillez prendre un moment pour enregistrer votre nouvelle produit au www.zephyronline.com/registration C’EST IMPORTANT Cet enregistrement rapide est utile à bien des égards. Il assure la couverture de votre garantie si vous avez besoin de service après-vente. À des fins d’assurance, il permet de confirmer que vous êtes le propriétaire.