Owners Guide

ManualsBrandsZephyr ManualsCooking AppliancesNapoli Island Mount Smart Range Hood with 6 Speed 700 CFM Blower, Proximity Controls, LED Light, Baffle Filters, ACT™ Technology, PowerWave™, Zephyr Connect, Wi-Fi, UL Listed, and ADA Compliant (with Remote or App): 42 Inch Width

14

Napoli Use, Care, and Installation Guide

NAPOLI

ISLAND

CORE

Installation Instructions

Mounting the Hood

Ceiling Preparation

1. Determine hood mounting location and

temporarily tape paper template (included with

the hood) to the ceiling.

2. Cut-out internal shaded area of template

to allow the ducting and electrical to pass

through.

3. Add wood blocking (min. 2” x 4”) onto ceiling

joists to reinforce ceiling above the drywall.

(FIG. C1).

4. Secure (2) #6 x 1” wood screws into points A

and B of the paper template (FIG. B). Do not

completely tighten screws, leave approximately

1/4” exposed.

Hood Preparation

5. Remove screws securing top and bottom

support frames together.

6. Adjust support frame to accommodate the

desired hood height and re-assemble the frame

using the previously removed screws (2 screws

for each support frame arm). (FIG. C2).

1

2

Ceiling Joists

Wood Blocking

Top Support Frame

Support Frame Arm

Bottom Support Frame

Hood Body

3

Mounting Screws

(pre-installed)

4

FIG. C

Hood is intended to be mounted to a ﬁnished

ceiling.

CAUTION

XP022220

A

B

Cut-Out Shaded Area

FIG. B

Front of Hood