Owner's Manual

Installation – Recirculating

For Tamburo (ZTA) only:

Unscrew and remove the front cover

2. Remove air diverter plate slot covers. Remove metal

air diverter plate from front slot and re-position to back

slot. Re-install air diverter plate covers.

1. Change rocker switch position from I to 0.

Rocker switch is located on electrical box to the right

of motor housing.

3. Using components from ZRC-0200, install (2)

charcoal lter brackets and center panel to

bottom of the hood with (4) screws for each

component. Screws are pre-installed to the hood.

Remove screws rst to install brackets and center

panel then re-install screws..

4. Install charcoal lters into charcoal lter brackets

5. Install the mesh lters.

back slot

front slot

Note: To use hood in air recirculating mode please purchase recirculating kit ZRC-0200

metal air

diverter

plate

charcoal lter

bracket

center

panel

charcoal lter

bracket

rocker switch