- Paradyne Network Device Product Manual

Zhone Technologies, Inc. IMACS Product Book, Version 4
March 2001 Page 14
II. IMACS Chassis and Common Equipment
1. IMACS Chassis and Back Plane
The IMACS is available in three chassis models to meet various space/capacity requirements. They are the IMACS
600 Universal Enclosure, the IMACS 800 Universal Enclosure and the IMACS 900 Universal Enclosure.
IMACS 800 Universal Enclosure
The IMACS 800 Universal Enclosure provides card slots on both the front and back of the unit for both front and
rear loading. These are sometimes referred to as the “Network” and “User” sides respectively. There are nine card
slots that are accessible from the front and an additional nine that are accessible from the back. Card slots are
intended to accommodate specific card types and are keyed so that only those card types may be inserted in those
slots. A CPU card may be inserted in either Slot C1 or C2. Two CPUs can be installed in Slots C1 and C2
simultaneously to provide CPU redundancy. All IMACS Universal Enclosure models are NEBS (TR63) approved.
The nine front card slots are allocated and shown in Figure 7 as follows:
Slot Number Card Types Supported
C1 and C2 CPU cards
P1, P2 and P3 Server cards
W1, W2, W3 and W4 WAN cards
C1 C 2 P1 P2 P3 W1 W2 W3 W4
F1 F2
1
2
3
EUR/US
JP1
Figure 6 - IMACS 800 Universal Enclosure—Front View