Specifications

ManualsBrandsZhongshan Camry Electronic ManualsBody Weight MonitorsBluetooth Body Fat Scale

18iF-010E R0

Bluetooth Body Fat Scale

Instructions for Use

iF1917B

ISO 9001 CERTIFIED BY SGS

Manufacturer: Zhongshan Camry Electronic Co., Ltd.

Address: Baishawan Industrial Park, Qiwan Road(N),

East District, Zhongshan City, Guangdong Province

Postal Code: 528403

Tel: 0760-88235618

Fax: 0760-88235600

Email: sales@camry.com.cn

The product picture is indicative only.

Appearance specifications please in kind prevail.

iF the device transfer from the lowest or highest storage environment, to

environment with 20℃, it takes at least two hours to recover to normal

working mode.

iF the ME EQUIPMENT is not likely to be used for some time，please

remove the battery.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

Under electromagnestic encironment, reset, collaspe and incorrect

measurement are allowed.

Summary of content (4 pages)

PAGE 1
Bluetooth Body Fat Scale Instructions for Use iF1917B iF the device transfer from the lowest or highest storage environment, to environment with 20℃, it takes at least two hours to recover to normal working mode. iF the ME EQUIPMENT is not likely to be used for some time，please remove the battery. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 2
1. Battery Installation 3. Registering and Connecting Open the battery cover on the back of scale, then install the batteries properly according to the pictures shown below. If the batteries have been already installed, put out the insulating strip. 2x1.5V AAA Battery or 4x1.5V AAA Battery. Please install battery according to polarity. Open APP SenssunLife, connect the device with APP and submit your personal profile.
PAGE 3
5. Buttons fuction & Personal parameters setting SET Turn on the scale and prompt to next parameter. Value up by each interval press. Press and hold the button to have consecutive value added. Value down by each interval press. Press and hold the button to have consecutive value reduced Note： 1. If the model has no button,please set personal parameters on APP. 2.The buttons are only for visitors and the default user code is 0. You can’t set user code on scale, APP will distribute one code automatically.
PAGE 4
FAQ The software can't obtain weighing results from Bluetooth scale. ● Please confirm the connection sign on the App interface to know the connection status. ● Confirm the Bluetooth is on in your device and the bluetooth scale is on within the valid range of signal coverage. ● Check whether the battery power is running low, please replace with a new battery. ● Relaunch the application. ● Turn off the Blueooth and on again, then bridge the Bluetooth connection between scale and smart phone again.