Use Instructions

5 6
VOLUME MEASURING
Put a
container
1. Place the scale on a solid and flat surface.
2. Press the button to turn on the scale.
3. Press the UNIT button to convert the mode to Water or Milk volume mode.
4. Put a container on the scale.
5. Press the button for Zero or Tare.
6. Pour the liquid (water or milk) into the container. LCD will show the volume of the liquid.
Condition 1: "ZERO" function
When the total sum of all loads on the scale
is≤4% of the scale's max.weight capacity:
ZERO & TARE FUNCTION
You can weigh different loads consecutively without removing loads from the scale.
Put the first load on the scale, get a weight reading. Press the button to reset
the display reading to “0” before adding the next load. You can repeat this operation.
Pour liquid
LCD will show “- - - -” or “0g” each time
is pressed. “- - - -” means not
stable, please wait for a moment.
“0g” and meanwhile an icon “o” on the
LCD means the ZERO function is activated.
Max. weight capacity remains unchanged.
(For example:
When capacity is 5kg, 4% is 200g;
When capacity is 10kg, 4% is 400g)