Use Instructions

7 8
Condition 2: "TARE" function
When the total sum of all loads on the scale
is>4% of the scale's max. weight capacity:
Under this condition:
(For example:
When capacity is 5kg, 4% is 200g;
When capacity is 10kg, 4% is 400g)
WARNING
OVERLOADED WARNING
When LCD shows “Err”, it is overloaded ( Max
capacity is shown on the product), please take
off the loads to prevent damage to the scale.
LOW BATTERY WARNING
When LCD shows “Lo”, battery power is low,
please replace with a new battery (ies)
AUTO OFF (BATTERY POWER SAVING MODE)
If there is no operation or weight changing
in several minutes, the scale will be auto-off.
You can recall the total weight of current
loads during the weighing, by pressing the
button. If you want to continue the
weighing, just press to reset the
display to “0” again.
LCD will show “- - - -” or “0g” each time
is pressed. “- - - -” means not
stable, please wait for a moment.
“0g” and meanwhile an icon “T” on the
LCD means the TARE function is activated.
Max. Weight capacity is reduced by the total
weight of all loads.