Installation & Assembly

Table Of Contents

30 mm

1 1/5"

Place the furniture against a wall of your choice. On the bottom side of top

panel LE, indentify the slots as illustrated. Based on the slots' locations and

top panel LE, create marks on your wall with a pen.

Move the furniture away from the wall. From the marks, measure straight

down by 30mm or 1.1/5" and create a dot. Through this dot, attach the tip-

over restraint to your wall. Based on your type of wall, please contact a

hardware store to purchase the correct type of fitting(s) to use on your wall.

Move the furniture back to the wall again. Next, pass the tip-over restraint

strips through the holes in top panel LE, going from the wall to the inside of

the furniture. From the inside of the furniture, press the strips against the

bottom of top panel LE and insert the dedicated screws as illustrated. The

tip-over restraints have now been properly installed.

# 94073