Instructions / Assembly

WWW.ZIPPITY-OUTDOOR.COM
7
ASSEMBLY INSTRUCTIONS
ZP19003
STEP 2: INSTALL PIPE ANCHOR
STEP 2.1
Drive your Pipe Anchor (C)
just above the ground when
Try to drive the pipe anchor as level as possible. Check that
the pipe is usually established and you cannot manually pull
the pipe anchor back into level.
Note: Check that the
pipe anchor is level in
Note: If your ground is
dry and hard, use a claw
hammer to loosen 2” to
4” of dirt around the base
of the pipe anchor.
C
STEP 2.2