Owner's manual

使用手冊 – 電源供應器 – 機種 HG2, HP2, PSM and PSL Ver. 1.0
規格書
請對照實際購買的產品型號。
第 11 頁，共 14 頁
INPUT CHARACTERISTICS: PSL-6701P
 VOLTAGE: 90 ~ 264 VAC FULL RANGE.
 FREQUENCY: 47 ~ 63 Hz.
 INPUT CURRENT: 10.0 / 11.0 / 12 A FOR 115 VAC, 5.0 / 5.5 / 6.0 A FOR 230 VAC.
 INRUSH CURRENT: 65 A MAX. FOR 115 VAC, 125 A MAX. FOR 230 VAC.
OUTPUT CHARACTERISTICS:
OUTPUT CURRENT REGULATION OUTPUT
MIN.[A] MAX.[A] LOAD LINE
5V 2.5 35
±
4%
±
1%
60mV
12V 1.0 45
±
5%
±
1%
100mV
-5V 0 0.8
±
5%
±
1%
100mV
-12V 0 1.0
±
5%
±
1%
100mV
3.3V 1.0 30 +5, -5%
±
1%
60mV
+5VSB 0.1 2
±
5%
±
1%
60mV
OUTPUT
VOLTAGE
RIPPLE & NOISE
MAX. [P-P]
REMARK: TOTAL OUTPUT POWER SHOULD NOT EXCEED 700W for PSL-6701P.
*** WHEN PERFORMING CROSS REGULATION TEST, IT IS REQUESTED TO SET THE HIGHER OUTPUT
CHANNEL AT 90% MAXIMUM AND THE LOWER OUTPUT CHANNELS AT 20% MININUM OF RATED
SPEC.
 TEMPERATURE RANGE: OPERATING 0
0
C --- 40
0
C, STORAGE –20
0
C --- 70
0
C.
 HUMIDITY: 10 ~ 90 % RH.
 HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & 90 VAC INPUT VOLTAGE.
 DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 MINUTE,
INPUT TO FRAME GROUND 1500 VAC FOR 1 MINUTE.
 EFFICIENCY: 70% TYPICAL, AT FULL LOAD.
 POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms.
 OVER LOAD PROTECTION: 110 ~ 160% MAX.
 OVER VOLTAGE PROTECTION:
+5V  5.7V ~ 6.5V, 3.3V  3.9 ~ 4.3V, 12V  13.6 ~ 15V.
 EMI: MEET FCC CLASS B, CISPR22 CLASS B.
 SAFETY: MEET UL 1950, CSA 22.2 NO/ 950, TÜV IEC 950.
 REMOTE ON / OFF CONTROL.
 SHORT CIRCUIT PROTECTION: SHUTDOWN AND LATCH.
 REMOTE SENSING ON 3.3 V DESIGN.
 MEET IEC-1000-3-2 CLASS D (ACTIVE PFC).
 DIMENSION: 86(H) X 150(W) X 220 (D) mm (STRETCH PS/2).
 COOLING: ONE 80 mm DC BALL BEARING FAN.
 I
2
C FEATURES (OPTIONAL).