Datasheet

The ZIRCON Advantage

•Helps map out the grid of metal through

any nonmetallic construction material,

including concrete, tile, and marble before

drilling or coring.

•Indicates metal type—magnetic (such as rebar)

or nonmagnetic (such as copper pipe).

• Shows the depth of metal from the surface

in both inches and centimeters.

•Has on-screen graphics that are easy-to-read

and interpret. Screen displays proximity, type

of metal, and depth of metal.

•Made to withstand daily jobsite use.

The MT6 metal locator finds both ferrous and

nonferrous metal, and indicates depths up to

6 inches (152 mm) deep.

Key Features

• Locates metal up to 6 inches deep

•Finds all types of metal

• Identifies magnetic vs. nonmagnetic

•Indicates depth of metal found

• Large LCD screen

•Tough for jobsite use

Applications

Find rebar, metal pipes, conduit,

and plumbing before:

•Drilling into slabs for anchor bolts

•Coring through floors for

wire bundles

•Cutting openings in concrete walls

•Drilling to add rebar to slab joints

• Estimating a demolition job

– Find nails in used lumber before

sawing, planing, or sanding

MT6

Electronic

Metal Finder

www.zircon.com

PAGE 1
MT6 Electronic Metal Finder The MT6 metal locator finds both ferrous and nonferrous metal, and indicates depths up to 6 inches (152 mm) deep. Key Features • Locates metal up to 6 inches deep • Finds all types of metal • Identifies magnetic vs.
PAGE 2
Dimensions 8.87 in. L x 3.84 in. W x 2.23 in. D (251 mm x 109 mm x 63 mm) Weight 10.1 oz. (286 g) without battery Battery type 9-V alkaline (not included) Position accuracy Center of #4 (1⁄2 in.) rebar or 1⁄2 in. (13 mm) copper pipe at a minimum grid spacing of 6 in. (152 mm) typically within 1⁄2 in. (13 mm) Depth Up to 6 in. ±1 in.