Technical Specifications

©
2017. ACT, CenterVision, DeepScan, SpotLite, StudSensor, WireWarning, and Zircon are trademarks or registered trademarks of Zircon Corporation • C/N 2309 Rev C 03/17
ZirconTV
ZirconCorporation
ZirconTools
ZirconToolPro
ZirconTools
StudSensor
™
70
Zircon Corporation
|
1580 Dell Avenue
|
Campbell, CA 95008
|
[e-mail]
|
www.zircon.com
|
408-963-4550
|
800-245-9265
SPECIFICATIONS
Dimensions 6.21 in. H x 3.04 in. W x 1.35 in. D
(158 mm x 77 mm x 34 mm)
Weight 5.5 oz (156 g) without battery
Battery Type 9V alkaline (not included)
Position Accuracy*
Up to a depth of
3
⁄4 in. (19 mm):
Typically within
1
⁄8 in. (3 mm)
Up to a depth of 1
1
⁄2 in. (38 mm):
Typically within
3
⁄16 in. (5 mm)
Depth* StudScan mode: Up to
3
⁄4 in. (19 mm)
DeepScan
®
mode: Up to 1
1
⁄2 in. (38 mm)
AC Position Accuracy*
Typically 90-250 V at 50-60 Hz within 6 in.
(150 mm) of a hot unshielded wire in drywall
AC Depth* In typical drywall with Romex
®
wiring,
wires can be detected up to 2 in.
(50 mm) deep
Operating Temperature
20° to 120°F (-7° to 49°C)
Storage Temperature
-20° to 150°F (-20° to 66°C)
Humidity 5-90% RH (non-condensing)
Water Resistance Splash and water resistant, not waterproof
*NOTE: Sensing depth and accuracy can vary due to moisture,
content of materials, wall texture, paint, etc. Not recommended
for use on lath and plaster. Brand new 9V battery required for
proper operation. Indoor use only.
Find Stud Center
Scan Thick Walls for Studs
Find Wood or Metal Studs
Center Finding Stud Finder with
Built-in Erasable Marker
StudSensor
™
70 quickly and easily locates
the center and edges of wood and metal
studs and joists behind walls, floors,
and ceilings. Patented CenterVision
®
technology finds the center of studs in a
single pass. A built-in erasable wall marker
allows for one-handed operation.
• StudScan mode locates the center and
edges of wood or metal studs up to
3
⁄4 in.
(19 mm) deep
• DeepScan
®
mode doubles the scanning depth
to 1
1
⁄2 in. (38 mm)
• LED lights indicate direction, edges,
and center of studs
• Patented SpotLite
®
Pointing System and audio
tone signals when the stud center is located
• WireWarning
®
Detection indicates the
presence of live, unshielded electrical wiring up
to 2 in. (51 mm) deep
• ACT
™
(Auto Correcting Technology)
automatically corrects common errors,
such as when scanning begins over a stud
• Built-in erasable wall marker enables users to
mark targets with a simple push of a button
WireWarning
®
Detection
Erasable Maker
CENTER FINDING