Use and Care Manual

7
Installing the Legs
The ranges must be used with the legs properly installed. Four height-adjustable legs
are shipped with the range, in a foam container above the range.
1. Before installing the legs, position the appliance near its final location as the legs
are not suitable for moving the appliance over long distances.
2. After unpacking the range, raise it enough to insert the legs in the appropriate
receptacles situated on the lower part of the appliance. Lower the range gently to
keep any undue strain from legs and mounting hardware.
3. Adjust leg height to the desired level by twisting the inside portion of the leg
as-sembly until the proper height is reached. Check with a level that the cooktop is
perfectly level.
Installing the Legs