Use and Care Manual

1
The manufacturer will not be responsible for any damage to property or to persons
caused by incorrect installation or improper use of the appliance.
The manufacturer reserves the right to make changes to its products when considered
necessary and useful, without affecting the essential safety and operating
characteristics.
This appliance has been designed for non-professional, domestic use only. Do not
place any pot or pan on the open oven door, the door is made of glass and can
break under the weight.
Before beginning installation, please read these instructions completely and carefully.
Do not remove permanently affixed labels, warnings, or plates from the product.
This may void the warranty. Please observe all local, state and national codes and
ordinances. Please ensure the range is properly grounded. The installer should leave
these instructions with the consumer who should retain for local inspectors use and
for future reference. The plug should always be accessible. Installation must conform
with local codes or in the absence of codes, the National Fuel Gas Code NSIZ223.
1/NFPA54. Electrical installation must be in accordance with the National electrical
code ANSI/NPA70-latest edition and/or local codes. In Canada: Installation must
be in accordance with the current CAN/CGA-fe 149.1 National gas installation
code or CAN/CGA-B 149.2, Propane installation code and/or local codes.
Electrical installation must be in accordance with the current CSA C22.1 Canadian
electrical codes Part 1 and/or local codes.
Installation of any gas-fired equipment should be made by a licensed plumber. A
manual gas shut-off valve must be installed in the gas supply line ahead of the oven
in the gas flow for safety and ease of service.
An air curtain or other overhead range, range, cooktop hood which
operates by blowing downward airflow onto the range, shall not be
used/installed in conjunction with this gas range.
WARNING
Important Safety Instructions