Designer Island Hood Installation 1
Designer Island Hood Installation *The recommended height to install your hood is 30˝ minimum and 3 6 " maximum above the cooktop. *For Outdoor (Copper and 304 Series) hood installation, the unit must be installed at a minimum of 36˝ above the grill. 1 Locate the center above the stove where the hood is to be installed. There are 2 brackets, the Crown Molding Bracket and the Chimney Mounting Bracket.
4 5 Attach the transition piece, rubber gasket and ducting to top of the hood. Attach the angle iron pieces to the hood. Measure your cut chimney, add 2.5in and attach the second angle iron to correct height for mounting. Install the duct work in the center of the ceiling bracket.
6 Slide chimney and place in the hood. Pull the top of the 7 Lift the hood to attach the angle irons to the ceiling bracket. Use screws pro-vided to attach. Chimney should be cut 2.5in short to allow for screwing angle irons into bracket. 8 Make your electrical and ducting connections. Use rigid duct wherever possible. Try and minimize the use of elbows. More elbows and longer runs create higher static pressure.