Instruction manual

16776 Zodiac G2 manual A5 2/12/08 12:57 PM Page 13

SECTION 5 – DIAPHRAGM ASSEMBLY

Diaphragm Assembly:

Prior to reinstalling the diaphragm, rinse the diaphragm and the inner extension

pipe thoroughly to remove any grit or algae. Make sure grey retaining ring is fitted

onto diaphragm. Make sure grey retaining ring is fitted onto diaphragm.

Step 1: Push the diaphragm onto the end of

the inner extension pipe until it sits

flush against the raised lip.

Step 2: Push the inner extension pipe through

the narrow end of the yellow cassette

chamber (this will make a grating noise)

Step 3: Fit the inner extension pipe back into

the blue outer extension pipe body and

twist until secure

Step 4: Hold the machine head and slide the

yellow cassette chamber back into the

head of the machine.Turn in a

clockwise direction until firm

(approximately three turns).

Do not over tighten.