Instruction manual

16776 Zodiac G2 manual A5 2/12/08 12:57 PM Page 11

SECTION 1 – INSTALLATION

It is much easier to assemble your new Zodiac G2

automatic pool cleaner beside

the skimmer box of your pool.

PREPARE POOL AND FILTRATION SYSTEM

Step 1: Where the main drain is connected to your skimmer box, block off the

access to the main drain.

Step 2: Manually vacuum your pool.

Step 3: Clean the filter and empty the skimmer basket(s) and the pump strainer

basket according to the manufacturer’s instructions.

Note: The circulation system must be operating at its maximum water flow when

you install the Zodiac G2™ otherwise re-adjustment will be necessary

when you clean the filter and baskets.

Step 4: Adjust the water flow from all return inlets (a) downward and toward each

other (or b. downward and toward the centre of the pool).

(A)

(B)

GENERAL POOL

SCHEMATIC

All diagrams are provided for reference

and for terminology used throughout this

manual. Your pool may vary.

Note: If no return inlet directional fittings exist, or directionals cannot be directed far enough

down to prevent water flow from affecting the natural movement of the Zodiac hose, you

must install Zodiac return line diverters.They are available through your Zodiac dealer.

FOR POOLS WITH RETURN INLET EYEBALLS,TURN EYEBALL DOWN