Instruction manual

16776 Zodiac G2 manual A5 2/12/08 12:57 PM Page 12

SECTION 6 – POOL PULSE

POOL PULSE®:

The Pool Pulse® is a flow meter that measures the volume of water flowing through

your Zodiac cleaner. It must be used to properly set the flow and can be used as a

diagnostic tool when the cleaner isn’t running properly.

IDEAL TOO HIGH

TOO LOW

Showing Setting 2 Showing Setting 3

Showing Setting 1

HOW TO USE POOL PULSE®:

Pool Pulse can only be used if the filtration system is on.

1) Attach the Pool Pulse® to the first hose length at the cleaner end (ie: the one

attached to the pink ada

ptor) and keep it under water as shown

2) Ensure the Pool Pulse® is in the ideal range when viewed from the side

3) Keeping the hose under water, remove the Pool Pulse®

4) Submerge the cleaner head, and when the bubbles stop coming from the

extension pipe

, attach the hose.

If the flow is in the low range, r

eview the installation procedures. A dirty pool filter

or clogged basket is usually the main cause of low flow. Other types of hydraulic

problems may require a pool professional. If your pool has multiple skimmers and flow

is in the low range, close the skimmer the cleaner is not attached to.

If the flow is in the high range,

review the installation procedures. Lower AD

Flow Valve setting to #1.