Specifications

Operation
Basic operation
Turn on POWER switch.
The BANK part of the display will show lJSER 0, and the PATCli LED 1
will light. The Parameter Value display area will show the output level
This means that the currently selected patch
is the first (of four) patches in
user bank
0.
Call your desired bank and patch.
Use the
BANK keys (UP and DOWN) to select your desired bank. Use the
PATCH keys (1 through 4) to choose a patch within the bank. As an
example, let's select preset
1, patch 2.
Selecting patch 2 in preset bank 2.
+ Display illustrations shown here do not necessarily match those during actual use.
They are provided for general reference only.