Specifications

Other Functions
Tuning mode
Press the TUNE key once ancl the tuning fork mark will appear on the
display. The 9002PRO will emit a pitch of 440Hz. Tune your A string to this
pitch.
If you want a slightly higher reference pitch, use the CURSOR keys
to change to 441 Hz or 442Hz. In the tuning mode all effects turn off and
parameter names and indications are not displayed. To return to normal
use. press the TUNE key again,
IN
The pitch can be turned on and off with the BYPASS key,
Metronome mode
Press the METRO key once and the "METRO" mark will appear on the dis-
play. The metronome
LED will flash in time \vith the beat which is adjust-
able over a range of
40 to 250 beats per minute, using the CURSOR keys. In
the metronome mode, effects remain on and you can change patches, but
parameter names ancl indications turn off.
To turn off the metronome,
press
the METRO key again. For live performance, you may want just the
metronome
LED indication and not the audible beat: from the power-off
condition, while holding
down the METRO key, turn on the POWER
switch.
Remote control
IB)
With the optional remote controller 9002R, 9002F, or FC02, you can
conveniently select patches and banks
from any location.
o The 9002R is a compact controller that is ideal for hand-held use.
It can only select patches within the current bank, Change banks
with the controls on the
main unit.
0 The 9002F is a foot controller that can only select patches within
the current bank. change banks with the controls on the main unit.
0 The FC02 is a foot controller that can be used to select patches
and control bank changing, but only for the user group. with each
push of the bank pedal, the bank
is switched as follows:
0
-> 1 -> 2 -> 3 -> 4 -> P -> 5 -> 6 -> 7 -> 8 -> 9
pressing the patch pedal while
"P" is displayed activates the
bypass condition.