User Guide

Quick Guide 2 4-track mode basic operation
ZOOM H4
21
the cursor to “METRONOME”. Then
press the jog dial.
The METRONOME setting screen appears.
3.
Move the jog dial up/down to bring
the cursor to “CLICK”. Then press
the jog dial.
The CLICK menu appears. This menu lets you
select under which conditions the metronome
click sound is heard. Available settings are as
follows.
R Playback only
O Recording only
O /R Recording and playback
OFF Always off (default)
4.
Move the jog dial up/down to select
“
O /R ”. Then press the jog dial.
The display returns to the condition of step 3.
5.
Move the jog dial up/down to bring
the cursor to “TEMPO”. Then press
the jog dial.
The TEMPO menu for selecting the metronome
tempo appears.
6.
Move the jog dial up/down to select
the desired tempo value (40.0 – 250.0
BPM). Then press the jog dial.
To try out the metronome and check the tempo,
you can press the top (@
) of the [MENU] key.
7.
Move the jog dial up/down to bring
the cursor to “LEVEL”. Then press
the jog dial.
The LEVEL menu for setting the metronome
level appears.
8.
Move the jog dial up/down to set the
level. Then press the jog dial.
HINT
You can also change the settings for pre-count
(default: OFF) and beat (default: 4/4), as described
on page 77.
Step 2: Recording the first
track
Now you are ready to record the first track while
listening to the metronome sound.
HINT
When recording the first track, it is recommended
to choose guitar chords or another part where the
song progression can be easily followed. You may
also want to record a guide melody using guitar
chords and vocals first, then add other
instruments, and finally replace the guide track
with the main vocal track.
Selecting the input source/
recording track
This section explains how to select the input
source and recording track in 4-track mode.
1.
At the 4-track mode top screen,
press the bottom (INPUT MENU) of
the [MENU] key.
The INPUT menu for making various input
related settings appears.
H4_E.book 21 ページ ２００６年９月１日 金曜日 午後７時５６分