User Guide

Stereo Mode
ZOOM H4
38
Pressing the top (@ ) of the [MENU] key will
start playback from that point.
Playing a specified section
repeatedly (A-B repeat)
The A-B repeat function lets you specify a point
A and point B and automatically play the section
between these two points repeatedly. This is
convenient for example to check a specific part
of a recording.
1.
Verify that the stereo mode top
screen is being shown on the display.
Settings for A-B repeat are made at the top
screen.
2.
Locate the start point for the range
to be repeated.
3.
Move the jog dial up/down to bring
the cursor to the A
↔ B button. Then
press the jog dial.
The A ↔ B button flashes and that point is set as
the A-B repeat start point (point A).
HINT
In stereo mode, points A and B can be set only
while the recorder is in playback or stop mode
(not during recording).
4.
Locate the end point for the range to
be repeated. Bring the cursor to the
A
↔ B button and press the jog dial.
The A ↔ B button changes from flashing to
reverse indication, and that point is set as the
A-B repeat end point (point B).
NOTE
To redo the point A/B setting, bring the cursor to
the A
↔ B button and press the jog dial to return
the button indication to the original condition.
Then repeat the procedure.
5.
To start repeat playback, press the
top (@
) of the [MENU] key.
Playback starts. When the end point (point B) is
reached, the recorder returns to the start point
(point A), and playback continues.
NOTE
• If you set point B before point A, repeat
playback occurs between points B
→ A.
• If you start playback at a location after both
point A and B, repeat playback is not carried
out. Instead, normal playback occurs.
• In stereo mode, the A-B repeat function is not
available during recording.
6.
To stop repeat playback, press the
top (@
) of the [MENU] key once
more.
Even after stopping, you can use A-B repeat
again, until you cancel the function.
7.
To cancel A-B repeat, bring the
cursor to the A
↔ B button and press
the jog dial.
The button indication returns to the original
condition, and the settings for points A and B are
lost.
A↔B button
A B
Playback
H4_E.book 38 ページ ２００６年９月１日 金曜日 午後７時５６分