User Guide
4-Track Mode
ZOOM H4
42
The [REC] key stays lit constantly, and recording
begins.
3.
To stop recording, press the [REC]
key once more, or press the top (@
)
of the [MENU] key.
Recording is completed and the recorder stops.
Recorder
This section explains how to operate the recorder
in 4-track mode.
Selecting files for playback
Files recorded in 4-track mode are saved by
project on the SD card. In Always New mode,
you can record multiple files and later select the
file to play for each track.
The procedure for assigning a saved file to a
track is described below.
1.
Bring up the 4-track mode top
screen on the display.
File selection is carried out at the top screen.
HINT
• Files recorded in 4-track mode are
automatically assigned names using the
pattern "TRKx-yy.wav" (where x is the track
number and yy is a number from 00 – 99).
• For stereo files covering two tracks recorded
with stereo link enabled, the track number "x" is
always the sequence "12" or "34".
• Files recorded in stereo mode (provided that
the recording format is 44.1 kHz/16 bit) can be
included in a 4-track mode project and
assigned to tracks 1/2 or 3/4 (
→
p.74).
2.
Use the TRACK [1] – [4] keys to
select the track to which you want to
assign a file.
The selected track number appears on the
display, and the name of the file currently
selected for the track is shown.
HINT
• The TRACK [1] – [4] keys not only serve to
change the status of a track (off: out, playback:
lit in green, record: lit in red) but also allow the
selection of a track.
• When the TRACK [1] - [4] key for a track that is
currently not selected is pressed once, the
track will be selected, but its status does not
change.
HINT
•Tracks for which stereo link is enabled are
shown as "1/2" and "3/4". In this case, pressing
the key for either of the two tracks will select
both.
• If no file is selected for a track, the indication
"NO DATA" is shown.
3.
Move the jog dial up/down to bring
the cursor to the file name indication.
Then press the jog dial.
The file can now be selected.
4.
Move the jog dial up/down to select a
file.
For mono tracks, only monaural files can be
selected. For tracks where stereo link is enabled,
Number of currently selected track
Currently selected file name
Number of selected track
Currently selected file name
H4_E.book 42 ページ ２００６年９月１日 金曜日 午後７時５６分