Quick Start Guide

Recording/overdubbing and playing tracks

The has recorder functions that enable simultaneous recording of up to 12 tracks and

simultaneous playback of up to 10 tracks. The input signals of every channel and from the

master fader output can be recorded and played back.

Recording

1. Press to light it.

2. Use to turn overdubbing on or off.

• Lit (ON): Overwrite the current project

• Unlit (OFF): Create a new project and record in it

3. Press for the channels you want to record, lighting them red.

4. Press to light it and start recording standby.

Ifarecordedlealreadyexistsinthecurrentproject,and

is off, pressing will cre-

ate a new project and then start recording standby.

HINT

5. Press to light it and start recording.

6. Press to stop recording.

NOTE

When recording stops, “Please wait” appears on the display. Do not turn the power off or re-

move the SD card while this message appears. Doing so could cause data loss or malfunction.

See the Operation Manual for information about punching in/out, automatic recording and

pre-recording.

HINT