Quick Start Guide

14
Functions
Mixer
Channels 1–6 have high-quality mic preamps built-in.
Each channel can also have 3-band EQ, LOW CUT, PAN, and effect send amounts set.
Channel 8 has a jack to connect a smartphone.
Effects The mixer includes 1 bus with 8 types of send-return effects. Parameters for each effect
can be adjusted.
Scenes This function enables saving up to 7 sets of current mixer settings as scenes and
recalling these saved settings at any time. The mixer settings can also be reset.
MONITOR OUT The MONITOR OUT jacks can output 3 different monitor mixes, allowing different
performers to receive mixes as they like.
SOUND PAD Audioles(WAVformat)canbeassignedtotheSOUNDPADbuttons.Pressoneto
playtheassignedle.Thelevelandplaybackmethodcanbesetforeachpad.When
shipped new, 13 sounds are already included for use.
Recorder
The recorder can simultaneously record 12 tracks, including each channel and the
master track, and simultaneously play 10 tracks. Recorded data is saved in 16/24-bit,
44.1/48/96kHz WAV format and managed in units called projects.
The following functions can be used with the recorder.
• Recording, overdubbing and playing tracks
• Adding marks and moving to marks
• Punching in/out
• Mixing down (master track recording and playback)
• Automatically starting recording when a set volume is exceeded.
• Pre-recording before recording starts
Projects The following operations can be used with projects.
• Selecting projects for playback
• Changing project names
• Deleting projects
• Protecting projects
• Checking project information
• Checking, deleting and moving to marks
Audio les Thefollowingoperationscanbeusedonaudioles.
•Deletingaudioles
•Assigningaudiolestoeachchannel
Metronome
The volume, sound and pattern can be changed and the metronome includes a precount
function. The volume of each output jack can be set.
Audio interface
When used as a USB audio interface, it supports 12 ins and 4 outs when the sampling
rate is 44.1/48 kHz.
Card reader
Use as a card reader is possible when connected to a computer.
Settings
Settings related to the recorder and SD cards can be made by pressing the RECORDER
button, and then the SETTING button.
Recorder Recording format settings
Automatic recording settings
Showing recording levels on level meters
Latency adjustment setting
Playback settings
Pre-recording settings
SD cards Checking open space
Resetting to factory settings
Testing card performance
Other settings Date and time setting
Changing the sampling rate
Disabling the automatic power saving function
Adjusting the display contrast
Changing the display backlight time
Settings related to batteries
Restoring factory defaults
The unit can be restored to its factory default settings.
Firmware
Youcancheckthermwareversionandupdateittothelatestversion.
See the Operation Manual for details.